Applicable CPU Units: CQM1H-CPU51/61.
Connection location and number of Units: One Unit only.The Unit must be connected between the Power Supply Unit and the CPU Unit.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 170 g max.Model : CV500-CN232.
Cable I / O connection.
20m cable length.Unit type: CS-series Special I/O Units CP1E-N20DR-D REFERENCE MANUAL.
Product name: Analog Input Units CP1E-N20DR-D
Specifications: I/O points, 8 inputs;
Signal range selection,
Set separately for each input;
Signal range, 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 V to 10 V, 4 to 20 mA;
Resolution, 1/8,000 (Settable to 1/4,000);
Conversion speed, 250 s/point max.
(Settable to 1 ms/point).
Externa connection, Removable terminal block.
Current consumption: 5V, 0 CP1E-N20DR-D REFERENCE MANUAL. 12A; 26V, 0.09A.
Standards: UC1, N, CE.
For Various Analog I/Os.
Analog Input Units for converting,
analog input signals into binary data.
Analog Output Units for converting ,
binary data into analog output signals. Model: C500-BC061(3G2A5-BC061).
6 slots(5 linkable slots).
Product name: DC Power Supply Unit.
Power supply voltage: 24 VDC. 2A;
24-VDC output capacity, 0 CP1E-N20DR-D REFERENCE MANUAL. 4A;
Total power consumption, 19.6w.
Options: 24-VDC service power supply, No;
RUN output, No; Maintenance forecast monitor, No.
Standards: UC1, N, L, CE.
Equipped with the RUN output for,
checking the operation status,
as well as the replacement.
notification function for easy,
maintenance.
Lineup of five models including the,
AC power supply (25W).
Stable power supply is available from the,
CJ-series CPU Unit to each I/O Units via the,
dedicated bus. The most suitable Power Supply,
Unit can be selected among various I/O ,
specifications and/or options CP1E-N20DR-D Manual. Name: Wired Master.
Model: C200H-RM201.C500-NC Special I/O Unit C/CV Servo Module Single Axis Stepper C500-NC111-V1.Specifications: Two RS-422A/485 ports.Model: C500-CN812N.
Cable length 80cm. CP1E-N20DR-D Manual.
CV Series C Series Expansion ← → I / O device CPU Connecting cable(Vertical-wired)1 axis, Pulse train output. directly connects to servomotor driver.