Model: CPM2C-24EDTC. Units with 24 I/O points
2 Fujitsu connectors.
Inputs: 16 inputs.
Outputs: 8 outputs.
Input type: 24 VDC.
Output type: sinking transistor.Power supply voltage: DC100V.
Note: operation with output contacts.
Power supply unit.
The power supply of the CPU rack is supplied by the power supply unit CP1E-NA20DT-D OPERATION MANUAL.
The following power units are available for selection CP1E-NA20DT-D
C200HW-PA204 (voltage: AC100-120V/AC200-240V)
C200HW-PA204S (voltage: AC100-120V/AC200-240V)
C200HW-PA204R (voltage: AC100-120V/AC200-240V)
C200HW-PD024 (voltage: DC24V)
In the past, PC connected to a measurement equipment or components must be given to the ASCII unit or BASIC unit to write a communication program.
Now, PC C200HX/HG/HE is installed on the communication protocol macro function,
Can be configured to these communications procedures through the PMCR instruction to the ladder program,
With this function system can be easily connected with a wide range of components CP1E-NA20DT-D OPERATION MANUAL. High-speed Counter Unit
A High-speed Counter Unit counts input signals from incremental rotary encoders or other sources.

Name: High-speed Counter Module CP1E-NA20DT-D OPERATION MANUAL.
Model: C200H-CT002.
Number of axes: 1 axis/Unit.
Operating modes: 6.Unit type: CS-series Special I/O Units.
Product name: Analog Input Units.
Specifications: I/O points, 16 inputs;
Signal range selection,
Set separately for each input;
Signal range, 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 V to 10 V, 4 to 20 mA;
Resolution, 1/8,000 (Settable to 1/4,000);
Conversion speed, 250 s/point max.
(Settable to 1 ms/point).
Externa connection, MIL connector.
Current consumption: 5V, 0.15A; 26V, 0.06A.
Standards: UC1, CE.
For Various Analog I/Os.
Analog Input Units for converting,
analog input signals into binary data.
Analog Output Units for converting ,
binary data into analog output signals. Type: CJ11 Special I/O Unit CP1E-NA20DT-D Manual.
Name: CompoBus/S Master Unit.
Specifications: Communications functions,
Remote I/O communications; No. of I/O points,
256 max. (128 inputs and 128 outputs);
Max. Units mountable per CPU Unit: 40.
No. of unit numbers allocated: 1 or 2(variable) CP1E-NA20DT-D Manual.
Current consumption : 5V, 0.15A; 24V,--.
Standards: UC1, N, L, CE.
CompoBus/S is a high-speed I/O bus.