Model : CVM1-PRS21-EV2.
For ladder.Cover for 10-pin terminal block.
Terminal cover for 8-point or 5-point I/O Units.Power supply: AC power supply.
Output method: Transistor output sink type.
Inputs points: 6 points.
Outputs points: 4 points.UM: 7.2K words.
DM: 6K words.
EM: --.
Instruction processing time (basic instructions): 0 CP1H-Y20DT-D OPERATION MANUAL. 3 µ.s min.
No. of I/O points: 880 points CP1H-Y20DT-D
Max. no.of con-necting Expansion I/O Racks: 2 Racks.
Max. no. of connecting High-density I/O Units(i.e., Group-2): Unavailable.
Max. no. of con-necting Special I/O Units: 10.
RS-232C: NO.Name: Temperature Control Module.
Model: C200H-TC102.
Sensor: Platinum resistance thermometer: JPt100 Pt100.
Control output: Voltage output CP1H-Y20DT-D OPERATION MANUAL. Product name: CJ2M (Built-inEtherNet/IP) CPU Units.
Specifications: I/O capacity/Mountable Units(Expansion Racks),
2, 560 points/40 Units(3 ExpansionRacks max. );Programcapacity,
5K steps;Data memorycapacity, 64K words,
(DM: 32K words, EM: 32K words ×1 bank);
LD nstruction execution time, 0. 04 μs;
EtherNet/IP function: YES;
Option board slot: YES.
Current consumption (A): 5V, 0 CP1H-Y20DT-D OPERATION MANUAL. 7(See note. );24V, --.
Standards: UC1, N, L, CE.
CJ2M for basic machine automation.
The CJ2M Series is ideal for packaging and general.
machine automation needs. Connectivity is assured.
thanks to the built-in USB port and the choice of.
Ethernet and RS-232C/422/485 interfaces on the CPU. Name: e-CON Connectors.
Specifications: Inputs; 16 inputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost cann be reduced CP1H-Y20DT-D Manual.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee CP1H-Y20DT-D Manual.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.