Power supply: DC power supply.
Output method: Relay output.
Inputs points: 12 points.
Outputs points: 8 points.Number of inputs: 32 pts.
Input Voltage: 12 V DC.
Input Current: 4 mA.Name: CS1D Expansion Backplane.
Specifications: Applicable systems,
Duplex CPU, Dual I/O Expansion System only;
Number of Power Supply Units,
2 Units max CS1W-CLK12-V1 (H-PCF CABLE) Installation Guide. (for duplex operation);
Number of I/O Units, 9 Units max CS1W-CLK12-V1 (H-PCF CABLE)
(Slot number 0 is reserved for an,
I/O Interface Unit).
Current consumption: 5V system, 1.21A;
26V system, --.
Standards: UC1, CE.
Redundant CPU Units , Power Supply Units ,
Communications Units ,
and Expansion I/O Cables. Model: C200H-ID216.
No. of points: 64 pts.
Specifications: 24VDC.
Weight: 180g max CS1W-CLK12-V1 (H-PCF CABLE) Installation Guide. Power supply: AC power supply.
Output method: Transistor output source type.
Inputs points: 24 points.
Outputs points: 16 points. Output method: Analog resolution: 1/256.
Analog Inputs: 2.
Analog Outputs: 1.Name: Screw Terminal Block with SSR Outputs.
Specifications: Outputs;
8 outputs; SSR.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet CS1W-CLK12-V1 (H-PCF CABLE) Installation Guide.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Model : C500-NC112.
1-axis control.Name: Bit Slave Units with e-CON Connectors.
Specifications: Outputs; 2 outputs; NPN.
Simple and Intelligent Bit Slaves,
with Industry-standard e-CON connectors.
Slave Units capable of 2-point bit-level distribution.
The I/O power supply is supplied from the communicaations,
power in the previously connected flat cable, and has a,
short-circuit detection function for protection CS1W-CLK12-V1 (H-PCF CABLE) Manual.
Industry-standard e-CON connectors.
Short-circuit protection safeguards the network,
from I/O short circuits CS1W-CLK12-V1 (H-PCF CABLE) Manual.
Simple communications connections,
with flat cable and connectors.
Bit-level distribution to support,
essentially any application.