Ultra-slim Timer for G2R Relay Socket.
Pin configuration compatible with G2R Relay and mounts to the,
P2R/P2RF Socket.
Standard multiple time ranges and multiple operating modes.
Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Volt,
age, and EMC Directives. Classification: Preset Counter.
Input signal system (Count & reset inputs): Contact, Transistor H7CX-A4W Communications Manual.
Mounting method: Flush mounting, surface mounting H7CX-A4W
Display: 7-segment LEDs (10 mm high), Up indicator.
Number of digits: 4 digits (0 to 9,999).
Backup power for memory protection: Yes (100 to 240 VAC only).
Control output: Contact (SPDT).
Operating mode: Up counting.
Max.counting speed: 30 cps.
All Required Counter Functions H7CX-A4W Communications Manual.
Incorporated in a Compact DIN-sized.
(48 × 48) Housing.
In addition to Up and Down models, a reversible (Up-Down),
counter is also available.
Maximum counting speed of 5,000 cps, never before attained by,
a small-size preset counter.
Power supply freely selectable within a range of 100 to 240 VAC.
Also, power supply for the DC-operated models is selectable,
within a range of 12 to 48 V H7CX-A4W Communications Manual.
Models with memory backup function against power failure available. Supply voltage: 24 VAC; 12, 24 VDC.
Time-limit contact: DPST-NO.
Short-time range model (0.1 s to 10 min).
Compact, Multi-function Timers,
for G2R Relay Socket.
The Push-In Plus Terminal Block Socket-compatible H3RN-@-B.
Timers in a black design join the Compact, Multi-function H3RN Timers.
Standard multiple time ranges and multiple operating modes.
UL listed.
Conforms to CSA and CE Marking. Count input: No-voltage input.
Display: 7-segment LCD.
Total counter: Max. couunting speed; 1 kHz H7CX-A4W Manual.
Dedicated for use on PCB.
Total Counters and Time Counter available. Count input: PNP/NPN universal DC voltage input(4.5 to 30 VDC).
Max. counting speed: 30 Hz ←→ 1 kHz(switchable).
Display: 7-segment LCD.

Model: Light-gray body H7CX-A4W Manual.
Eight-digits, counting range 0 to 99999999.
Dual input speed: 30 Hz ←→ 1 kHz,
(except for AC/DC multivoltage input models).