LK Automation Limited LK Automation Limited
Download Sort: OMRON
Home >> Manual Download
OMRON K8AB-VW1 Manual K8AB-VW1 User's Manual
Product model: K8AB-VW1
Name: Digital Temperature Controllers
Brand: OMRON
Sort: User's Manual
File language: English
Type: Medium-sensitivity models.
Sensed current: 500 mA/1,000 mA(switchable).
Type: High-speed models.
Operating time: Less than 0.1 s.
Economical, Compact, High-performance,
DIN 48 × 48-mm Ground Fault Relay for Low,
Voltages.
Performs continuous monitoring and detection of ground faults,
in low-voltage circuits due to the deterioration of insulation in,
electrical devices K8AB-VW1 User's Manual K8AB-VW1
Higher reliability ensured with improved resistance to high-fre,
quency noise when used for inverter loads.
Ground Fault Relays and through-type ZCTs (zero-phase current,
transformers) are mutually compatible.
The through-type ZCTs are equipped with test terminals,
allowing operation tests for Ground Fault Relays to be performed withease K8AB-VW1 User's Manual. Control supply voltage: 200 VAC; With voltage fluctuation compensation.
Operating current: 32 to 80 A.
Accurate Detection of Heater Element.
Burnout Regardless of Heater Capacities.
Accurately detects a burned heater element or elements incor,
porated by a molding machine or packing machine and outputs,
an alarm signal.
Precisely singles out the burned element even if one heater el,
ement among several heater elements has been burned out K8AB-VW1 User's Manual.
Applicable to small- to large-capacity heater elements.
All K2CU-F large-capacity, built-in current transformer models,
work with both single-phase and three-phase heaters.
Voltage fluctuation compensation function eliminates false,
alarms due to variations in the supply voltage. Type of input: AC current input.
Output type: no output.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC100 ~ 240V.
96 (W) * 48 (H * 95mm) some models are not equipped with depth.
The most suitable voltage and current signal simulation, measureement and display, identification of the panel table K8AB-VW1 Manual.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations K8AB-VW1 Manual.
Series of DeviceNet type.
The depth (panel below) is only short size 95mm.
Related products
OMRON
Single-phase Voltage Relay
K8AB-VS3 AC200/230V
OMRON Single-phase Voltage Relay K8AB-VS3 AC200/230V
Measuring voltage: 20 to 200 V AC/DC, 30
OMRON
Single-phase Voltage Relay
K8AB-VW3 AC/DC24V
OMRON Single-phase Voltage Relay K8AB-VW3 AC/DC24V
Measuring voltage: 20 to 200 V AC/DC, 30
OMRON
Single-phase Current Relay
K8AB-AS3 AC200/230V
OMRON Single-phase Current Relay K8AB-AS3 AC200/230V
Measuring current: 10 to 100 A AC, 20 to
OMRON
Single-phase Current Relay
K8AB-AS1 AC100/115V
OMRON Single-phase Current Relay K8AB-AS1 AC100/115V
Measuring current: 2 to 20 mA AC/DC, 10