Applicable CPU Units: CQM1H-CPU51/61.
Mounting locations/No. of Boards: One in Inner Board slot 2 (right slot).
Pulse inputs: 4 inputs.
Pulse outputs: 2 outputs.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 90 g max.
Name: Analog I/O Slave Units.
Specifications: Analog inputs;
4 inputs CPM2C-24EDTM.
Standards: CE, U, U1, C, N.
"Easyy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced CPM2C-24EDTM.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error CPM2C-24EDTM.
Model: CPM2C-24EDTM. Units with 24 I/O points
2 MIL connectors.
Inputs: 16 inputs.
Outputs: 8 outputs.
Input type: 24 VDC OMRON CPM2C-24EDTM.
Output type: sinking transistor.C500-ID I/O Unit DC Input 64 pts C500-ID219(3G2A5-ID219).
DC24V 7mA.Model: C200HW-PA204R.
Supply voltage: 100 to 120 VAC, 200 to 240 VAC.
Comments: With output contacts during operation.Inputs: 8I/O link input bits.
Outputs: 8I/O link input bits OMRON CPM2C-24EDTM.Name: CS1D CPU Unit for Single CPU Systems.
Specifications: Number of I/O points,
5,120 points (7 Racks);
Program capacity, 60 Ksteps;
Data Memory, 128 Kwords(DM: 32 Kwords,
EM: 32 Kwords×13 banks);
LD execution time, 0.02 μs;
Duplex CPUs, --;
Interrupt functions, OK OMRON CPM2C-24EDTM.
Current consumption: 5V system, 0.82A;
26V system, --.
Standards: UC1, N, L, CE.
Redundant CPU Units , Power Supply Units ,
Communications Units ,
and Expansion I/O Cables. Model: C500-BC051.
5 slots(3 linkable slots).
C500-AD/3G2A5-AD Special I/O Unit Analog Input C500-AD006(3G2A5-AD006).
Input: 4 pts.
Specification: +1~+5V、4~20mA.Unit type: CS1 CPU Bus Unit.
Product Name: MECHATROLINK-II,
compatible Motion Control Unit.
Specifications: Control modes: Position,
speed, or torque control via MECHSTROLINK-II,
Control axes: 32 axes max.
(30 physical axes, 2 virtual axes).
Internal programming language: Special,
motion control language.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.80A; 26V, --.
Standards: UC1, CE.
Improve Equipment Design Efficiency and,
> Shorten Tact Time CPM2C-24EDTM.
Control Servos for up to 16 axes in a,
motion network with one Position Control,
Unit that supports MECHATROLINK-II .
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association.