Sensing method: Diffuse-reflective.
Appearance: Vertical.
Connection method: Pre-wired Connector (M12).
Sensing distance: 2m.
Water- and Oil-resistant.
Photoelectric Sensor with.
Metal Housing Used for Long.
range Sensing.
Excellent resistance against the water and oil.
Easy application in locations with oil mist.
Long-range sensing up to 30 m with Through-beam models.
Shock resistance rated at 1,000m/s2 CS1W-BAT01
Product lineup includes metal M12 pre-wired connector models.
NPN/PNP selector switch output. Safety sensors to detect contacts by.
mounting to moving parts of hazards.
Conforms to PLe/Safety Category 3 in combination with the,
dedicated controller.
(applied when internal relays with forcibly guided contacts,
disable hazard source directly).
Simple one-unit structure integrating sensor and cover.
Resistant to the side force.
Can be used in various applications.
Sensor length: 150 mm to 6,100 mm, Height: 34 mm to 80 mm.
Models with sealing covers for doors are provided(SGE-245L).
Certified standard: EN1760-2 (Safety Edge Standard). Appearance: Knob-type Selector Switch A22W,
LED lighting (without Voltage Reduction Unit).
Number of notches: 3 notches.
Resetting method: Automatic.
Output: SPST-NC.
Operating voltage: 12 VAC/VDC.
Illumination color: R (red); Y (yellow); G (green); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
Lever for easily mounting and removing the Switch Unit.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Ideal for monitoring 3-phase power supplies.
for industrial facilities and equipment.
Monitor overvoltages and undervoltages for three-phase 3-wire,
or 4-wire power supplies.
DIP switch setting for 3-phase 3-wire or 3-phase 4-wire power supply.
Two SPDT output relays, 6 A at 250 VAC (resistive load).
Separate outputs possible for overvoltages and undervoltages.
World-wide power specifications supported by one Unit,
(switchable using DIP switch).
Relay status can be monitored using LED indicator.
CS1W-BAT01 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=CS1W-BAT01&select=5