Product name: NA5-7W.
Specifications: 7 inch wide screen, TFT LCD, 16,770,000 colors,
(24 bit full color), 800 ✕ 480 dots, Frame color : Black.
Bringing technology to life.
The NA-series Programmable Terminal transforms machine data,
into information, shows information and controls devices based on,
requirements at FA manufacturing sites.
The NA Series, together with the NJ/NX-series Machine Automation,
Controller and the Automation Software Sysmac Studio, allows you,
to simply and flexibly create sophisticated user interfaces to suit,
your machines D4D-1562N Control output: Time-limit SPDT and Instantaneous SPDT.
Supply voltage: 110 VAC (50/60 Hz).
Solid-state Timer with Single Time Range.
and Operating Mode.
Time range: H3BA-X8HA (0.05 s to 12 h),
H3BA-X8HB (0.3 s to 30 h),
H3BA-X8HC (0.6 s to 60 h).
Operating mode: ON-delay only.
Pin type: 8-pin only. Ratings: 0.1 A at 30 VDC.
Cable: VCTF oil-resistant cable*.
Actuator: Sealed pin plunger.
Cable length : 3m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.) Unique 18-mm-dia. Capacitive Touch.
Switch with Choice of Three Actuators is.
Activated with Only a Very Slight.
Physical Contact.
Only a slight activation force is required, enabling detecting micro.
deflections, thin wires, or thin-plate conductors (e.g., steel or stainless).
Application possible for non-conductors by indirectly connecting to ground.
Instantaneous operation upon contact with extremely limited,
hysteresis for high-precision position detection.
Diameter of only 18 mm with standard built-in amplifier, operation,
indicator, and sensitivity adjustment.
Conforms to IEC IP67 .
Freely replaceable antenna with screw mounting.
Free attachment to enable changing the antenna shape according to the application.
D4D-1562N Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=D4D-1562N&select=5