LK Automation Limited
Brand:
OMRON
61F-G2 | OMRON Basic type no float switch 61F-G2
OMRON 61F-G2 Manual And Instructions
61F-G2 datasheetPDF datasheet
61F-G2 Instruction Manual
OMRON 61F-G2 Product information and technical parameters：
Brand: OMRON
Name: Basic type no float switch
Model: 61F-G2
Modular panel direct mounting type, easy to install and maintain the basic type.
The relay unit is modular and easy to maintain.
With LED action display function, so that the state of action at a glance.
Tropical treatment and high temperature.
Stable detection can be achieved with high ambient temperature.
Type: G2 type, both full water alarm function of automatic water supply and drainage.
Package product name: 61F-G2 base * 1, 61F-11_ unit * 2.
Purpose: General use.
...More relevant models >>>>
61F-G2 datasheetPDF datasheet
61F-G2 Instruction Manual
OMRON 61F-G2 Product information and technical parameters：
Brand: OMRON
Name: Basic type no float switch
Model: 61F-G2
Modular panel direct mounting type, easy to install and maintain the basic type.
The relay unit is modular and easy to maintain.
With LED action display function, so that the state of action at a glance.
Tropical treatment and high temperature.
Stable detection can be achieved with high ambient temperature.
Type: G2 type, both full water alarm function of automatic water supply and drainage.
Package product name: 61F-G2 base * 1, 61F-11_ unit * 2.
Purpose: General use.
Appearance: Knob-type Selector Switch A22W,
LED lighting (without Voltage Reduction Unit).
Number of notches: 3 notches.
Resetting method: Manual.
Output: SPST-NC + SPST-NC.
Operating voltage: 12 VAC/VDC.
Illumination color: R (red); Y (yellow); G (green); A (blue).
Install in 22-dia. or 25-dia OMRON 61F-G2. Panel Cutout.
Lever for easily mounting and removing the Switch Unit.
Finger protection mechanism on Switch Unit provided as a standard feature 61F-G2
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Contact type: Standard load (250 VAC, 3 A; 30 VDC, 4 A) OMRON 61F-G2.
Operation: Momentary operation (Self-resetting).
Case color: Light gray.
Output: DPDT.
Lighting: Incandescent lamp; 28 VDC/VAC.
Pushbutton color symbol: R.O.G.W.
Large Square-bodied Lighted.
Pushbutton Switches.
Excellent operating sensitivity.
Excellent illumination with even surface brightness.
Three-color models (green, orange, red; chameleon lighting).
included in lineup OMRON 61F-G2. Actuator: Sealed top-roller plunger.
Hermetic; Molded terminals, -140 models.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCCC 61F-G2.
Contact your OMRON representative for information on approved models. Type: square.
Screen mode: no segmentation.
Using voltage: DC12V.
Operation Department color: red.
Micro design, the length of the body is only 23mm.
LED has fivee colors (red, yellow, green, white, and blue) 61F-G2.
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient.
LED lighting (without Voltage Reduction Unit).
Number of notches: 3 notches.
Resetting method: Manual.
Output: SPST-NC + SPST-NC.
Operating voltage: 12 VAC/VDC.
Illumination color: R (red); Y (yellow); G (green); A (blue).
Install in 22-dia. or 25-dia OMRON 61F-G2. Panel Cutout.
Lever for easily mounting and removing the Switch Unit.
Finger protection mechanism on Switch Unit provided as a standard feature 61F-G2
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Contact type: Standard load (250 VAC, 3 A; 30 VDC, 4 A) OMRON 61F-G2.
Operation: Momentary operation (Self-resetting).
Case color: Light gray.
Output: DPDT.
Lighting: Incandescent lamp; 28 VDC/VAC.
Pushbutton color symbol: R.O.G.W.
Large Square-bodied Lighted.
Pushbutton Switches.
Excellent operating sensitivity.
Excellent illumination with even surface brightness.
Three-color models (green, orange, red; chameleon lighting).
included in lineup OMRON 61F-G2. Actuator: Sealed top-roller plunger.
Hermetic; Molded terminals, -140 models.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCCC 61F-G2.
Contact your OMRON representative for information on approved models. Type: square.
Screen mode: no segmentation.
Using voltage: DC12V.
Operation Department color: red.
Micro design, the length of the body is only 23mm.
LED has fivee colors (red, yellow, green, white, and blue) 61F-G2.
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient.
...More relevant models >>>>