LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
A165K-T3MR-2 | OMRON Key-type Selector Switch A165K-T3MR-2
OMRON A165K-T3MR-2 Manual And Instructions
A165K-T3MR-2 datasheetPDF datasheet

OMRON A165K-T3MR-2 Product information and technical parameters:
Brand: OMRON
Name: Key-type Selector Switch
Model: A165K-T3MR-2
Number of notches: 3 notches.
Output: DPDT.
Reset method: Manual.
Key release position: Right.
Separate Construction with Cylindrical.
16-dia. Body.
Short mounting depth, less than 28.5 mm below panel.
Wide range of switching capacity from standard to microload.
Oil-resistant IP65 models.

Actuator: Sealed top plunger.
Indicator: LED.
Item: Basic.
Pretravel (PT): 1.7 mm max.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches OMRON A165K-T3MR-2.
Standard-feature gold-clad crossbar contacts provide high reliability A165K-T3MR-2
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models. Contact type: Standard load (250 VAC, 3 A; 30 VDC, 4 A) OMRON A165K-T3MR-2.
Operation: Alternate operation (Self-holding).
Case color: Black.
Output: SPDT.
Lighting: LED; 5 VDC.
Pushbutton color symbol: R.O.G.W.
Large Square-bodied Lighted.
Pushbutton Switches.
Excellent operating sensitivity.
Excellent illumination with even surface brightness.
Three-color models (green, orange, red; chameleon lighting).
included in lineup OMRON A165K-T3MR-2. Modular panel direct mounting type, easy to install and maintain the basic type.
The relay unit is modular and easy to maintain.
With LED action display function, so that the state of action at a glance.
Tropical treatment and high temperature.
Stable detection can be achieved with high ambient temperature.
G1 type automatic water supply, both to prevent idling or water alarm function.
Package product name: 61F-G1 base * 1, 61F-11_ unit * 2.
Purpose: tropical treatment. Type: Welding / wire type, with left column.
Drive rod: needle shaped button type.
Terminal specifications: with wire, the right side of the lead.
Contact speccifications: 1b A165K-T3MR-2.
The minimum size of the long stroke type can be reliably switch
The body part size is 78% of the previous generation product, which is beneficial to the miniaturization of the equipment.
No swing bars are also used ffor easy long stroke specifications (OT reference value: 1 A165K-T3MR-2. 4mm).
Without harmful substances to the environment, the lead type has also been lead-free.


...More relevant models >>>>