LK Automation Limited
Brand:
OMRON
C200H-B7A02 | OMRON Group-2 B7A Interface Module C200H-B7A02
OMRON C200H-B7A02 Product information and technical parameters：
Brand: OMRON
Name: Group-2 B7A Interface Module
Model: C200H-B7A02
Model: C200H-B7A02.
I/O points: 32 output points.
Weight: 300g max.
For Hand-held Programming Console.
2m.C200H A Backplane Isolating Panel For 3 Slots C200H-ATT02ASCII Unit
This program runs independently from the ladder-diagram program in the PLC.
Name: ASCII Module.
Model: C200H-ASC21.
Communications port>Port 1: RS-232C(peripheral device or termi-nal connection) OMRON C200H-B7A02.
Communications port>Port 2: RS-422A/485(peripheral Model: C200HW-ME32K.
Capacity: 32K words C200H-B7A02Commonly used with other Communications Units.Name: PID Control Module.
Model: C200H-PID01.
Output: Transistor output (open collector).Model: C200H-MR433.
Description: RAM, 4K words, battery back-up.with clock (CPU21, CPU23 only).Power supply voltage: DC100V.
Note: operation with output contacts.
Power supply unit OMRON C200H-B7A02.
The power supply of the CPU rack is supplied by the power supply unit.
The following power units are available for selection.
C200HW-PA204 (voltage: AC100-120V/AC200-240V)
C200HW-PA204S (voltage: AC100-120V/AC200-240V)
C200HW-PA204R (voltage: AC100-120V/AC200-240V)
C200HW-PD024 (voltage: DC24V)
In the past, PC connected to a measurement equipment or components must be given to the ASCII unit or BASIC unit to write a communication program OMRON C200H-B7A02.
Now, PC C200HX/HG/HE is installed on the communication protocol macro function,
Can be configured to these communications procedures through the PMCR instruction to the ladder program,
With this function system can be easily connected with a wide range of components.UM: 3.2K words.
DM: 4K words.
EM: --.
Instruction processing time (basic instructions): 0.3 µ.s min.
No. of I/O points: 640 points.
Max. no.of con-necting Expansion I/O Racks: 2 Racks.
Max. no. of connecting High-density I/O Units(i.e., Group-2): Unavailable.
Max. noo C200H-B7A02. of con-necting Special I/O Units: 10.
RS-232C: NO.C200H CPU 100/200-240VAC C200H-CPU02-E.Write voltage: 12.5V.
Access time: 150ns.General Information
The C200HS-SLK12 SYSMAC LINK fiber-optic module connects the PLC to the SYSMAC
LINK fiber-optic token bus peer-to-peer communications network C200H-B7A02. An external power supply option provides direct pass-through communications in case of modul
2m.C200H A Backplane Isolating Panel For 3 Slots C200H-ATT02ASCII Unit
This program runs independently from the ladder-diagram program in the PLC.
Name: ASCII Module.
Model: C200H-ASC21.
Communications port>Port 1: RS-232C(peripheral device or termi-nal connection) OMRON C200H-B7A02.
Communications port>Port 2: RS-422A/485(peripheral Model: C200HW-ME32K.
Capacity: 32K words C200H-B7A02Commonly used with other Communications Units.Name: PID Control Module.
Model: C200H-PID01.
Output: Transistor output (open collector).Model: C200H-MR433.
Description: RAM, 4K words, battery back-up.with clock (CPU21, CPU23 only).Power supply voltage: DC100V.
Note: operation with output contacts.
Power supply unit OMRON C200H-B7A02.
The power supply of the CPU rack is supplied by the power supply unit.
The following power units are available for selection.
C200HW-PA204 (voltage: AC100-120V/AC200-240V)
C200HW-PA204S (voltage: AC100-120V/AC200-240V)
C200HW-PA204R (voltage: AC100-120V/AC200-240V)
C200HW-PD024 (voltage: DC24V)
In the past, PC connected to a measurement equipment or components must be given to the ASCII unit or BASIC unit to write a communication program OMRON C200H-B7A02.
Now, PC C200HX/HG/HE is installed on the communication protocol macro function,
Can be configured to these communications procedures through the PMCR instruction to the ladder program,
With this function system can be easily connected with a wide range of components.UM: 3.2K words.
DM: 4K words.
EM: --.
Instruction processing time (basic instructions): 0.3 µ.s min.
No. of I/O points: 640 points.
Max. no.of con-necting Expansion I/O Racks: 2 Racks.
Max. no. of connecting High-density I/O Units(i.e., Group-2): Unavailable.
Max. noo C200H-B7A02. of con-necting Special I/O Units: 10.
RS-232C: NO.C200H CPU 100/200-240VAC C200H-CPU02-E.Write voltage: 12.5V.
Access time: 150ns.General Information
The C200HS-SLK12 SYSMAC LINK fiber-optic module connects the PLC to the SYSMAC
LINK fiber-optic token bus peer-to-peer communications network C200H-B7A02. An external power supply option provides direct pass-through communications in case of modul
...More relevant models >>>>