Number of analog inputs: 4 inputs.
Number of analog outputs: 2 outputs.
Input signal ranges: –10 to 10 V, 0 to 10 V, 0 to 5 V.
Output signal ranges: –10 to 10 V.Description : Connects peripheral port to RS232C computer port (Use with CS1W-CN114).Supply voltage: 100 to 240 V AC, 50/60 Hz (wide range) OMRON CQM1-CPU44-V1.
Operating voltage range: 85 to 265 V AC.
Output capacity: 5 V DC: 6 A 24 V DC: 0 CQM1-CPU44-V15 A(30 W total, see note).Connects CQM1H to G730 SYSMAC BUS remote I/O
modules; max. 64 I/O (32 or 16 inputs or outputs, DIP switch selectable)
Number of I/O points per Master: 128
Communications cycle time: 187.5 kbps
Max. transmission distance: 200 m
One master and two expansions allowed per systemNumber of inputs: 8 pts OMRON CQM1-CPU44-V1.
Input Voltage: 200 to 240VAC.
Input Current: 6 mA.Number of inputs: 32 pts.
Input Voltage: 24V DC.
Input Current: 4 mA.I/O points: 512 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.I/O points: 512 pts.
Program capacity(words): 15.2 K.
DM capacity (words): 6 K.
EM capacity (words): 6 K.
RS-232C port: YES.CQM1-B7A Special I/O Unit 16 POINT IN /16 POINT OUT CQM1B7A01 OMRON CQM1-CPU44-V1. Number of I/O points: 128 inputs and 128 outputs.Required for Analog Input and Output Units: For two Analog Units.Specification: Platinum resistance thermometer input (Pt100, JPt100),
heater burnout alarm,
manual operation,
ON/OFF or advanced PID control,
transistor (PNP) output, 2 loops.Number of inputs: 8 pts.
Input Voltage: 100 to 120V DC.
Input Current: 5 mA.Number of outputs: 16 pts.
Max. switch-ing capacity: 50 mA at 4.5 V DC to 300 mA at 26.4 V.
External connector: Terminal block.
Weight: 180 g max.Number of inputs: 16 pts.
Inpput Voltage: 12 V DC CQM1-CPU44-V1.
Input Current: 6 mA.Specification: 16 output points.Applicable CPU Units: CQM1H-CPU51/61.
Absolute Encoder inputs: 2 inputs.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 90 g max.
Specifications: 16 Kwoords with clock CQM1-CPU44-V1. Specification: Platinum resistance thermometer input (Pt, JPt),
ON/OFF or advanced PID control,
tran-sistor (NPN) output, 2 loops.