LK Automation Limited
Brand:
OMRON
CQM1-G7M21 | OMRON SYSMAC BUS module CQM1-G7M21
OMRON CQM1-G7M21 Product information and technical parameters：
Brand: OMRON
Name: SYSMAC BUS module
Model: CQM1-G7M21
Connects CQM1H to G730 SYSMAC BUS remote I/O
modules; max. 64 I/O (32 or 16 inputs or outputs, DIP switch selectable)
Number of I/O points per Master: 128
Communications cycle time: 187.5 kbps
Max. transmission distance: 200 m
One master and two expansions allowed per system
Number of analog inputs: 4 inputs.
Number of analog outputs: 2 outputs.
Input signal ranges: –10 to 10 V, 0 to 10 V, 0 to 5 V.
Output signal ranges: –10 to 10 V.Description : Connects peripheral port to D-sub 9pin connector.
Must be used with CS1W-CN114 (3.3m).Emergency stop unit: 2 inputs/2 outputs, 4 general-purpose inputs OMRON CQM1-G7M21. Specifications: With clock (see below).Specifications: 8 Kwords with clock CQM1-G7M21Number of outputs: 8 pts.
Max. switch-ing capacity: 2 A at 24 V DC.
External connector: Terminal block.
Weight: 200 g max.Peripheral port to RS-422 conversion cable (length: 0.2 m).Ranges : -10 to + 10V, 0 to 10V, 0 to 5V, or 0 to 20mA.
Power supply : Built-in, DC/DC converter.Number of inputs: 16 pts OMRON CQM1-G7M21.
Input Voltage: 24V DC.
Input Current: 6 mA.Expands G730 output capacity of G730 remote master ; adds 32 or 16 outputs, DIP switch selected.Number of inputs: 8 pts.
Input Voltage: 12 to 24V DC.
Input Current: 10 mA.Expands G730 input capacity of G730 remote master;
adds 32 or 16 inputs,
DIP switch selected.Applicable CPU Units: CQM1H-CPU51/61.
Absolute Encoder inputs: 2 inputs OMRON CQM1-G7M21.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 90 g max.
Specification: Platinum resistance thermometer input (Pt100, JPt100),
heater burnout alarm,
manual operation,
ON/OFF or advanced PID control,
transistor (PNP) output, 2 loops.Specification: Thermocouple input (K, J, L, T, R, S, B),
ON/OFF or advanced PID control,
manual op-eration,
transistor (NPN) output, 4 loops.Specification: Thermocouple input (J/K),
ON/OFF or advanced PID control,
transistor (PNP) output, 2 loops.Specifications: 16 Kwords without clock.Required for Analog Input and Output Unitss: For two Analog Units CQM1-G7M21. CQM1-LK Special I/O Unit I/O LINK MODULE SYSBUS CQM1LK501.Supply voltage: 100 to 240 V AC, 50/60 Hz (wide range).
Operating voltage range: 85 to 265 V AC.
Output capacity: 5 V DC: 3.6 A(18 W).Supply voltage: 1000 or 230 V AC (selectable), 50/60 Hz CQM1-G7M21.
Operating voltage range: 85 to 265 V AC.
Output capacity: 5 V DC: 6 A 24 V DC: 0.5 A(30 W total, see note).
Number of analog outputs: 2 outputs.
Input signal ranges: –10 to 10 V, 0 to 10 V, 0 to 5 V.
Output signal ranges: –10 to 10 V.Description : Connects peripheral port to D-sub 9pin connector.
Must be used with CS1W-CN114 (3.3m).Emergency stop unit: 2 inputs/2 outputs, 4 general-purpose inputs OMRON CQM1-G7M21. Specifications: With clock (see below).Specifications: 8 Kwords with clock CQM1-G7M21Number of outputs: 8 pts.
Max. switch-ing capacity: 2 A at 24 V DC.
External connector: Terminal block.
Weight: 200 g max.Peripheral port to RS-422 conversion cable (length: 0.2 m).Ranges : -10 to + 10V, 0 to 10V, 0 to 5V, or 0 to 20mA.
Power supply : Built-in, DC/DC converter.Number of inputs: 16 pts OMRON CQM1-G7M21.
Input Voltage: 24V DC.
Input Current: 6 mA.Expands G730 output capacity of G730 remote master ; adds 32 or 16 outputs, DIP switch selected.Number of inputs: 8 pts.
Input Voltage: 12 to 24V DC.
Input Current: 10 mA.Expands G730 input capacity of G730 remote master;
adds 32 or 16 inputs,
DIP switch selected.Applicable CPU Units: CQM1H-CPU51/61.
Absolute Encoder inputs: 2 inputs OMRON CQM1-G7M21.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 90 g max.
Specification: Platinum resistance thermometer input (Pt100, JPt100),
heater burnout alarm,
manual operation,
ON/OFF or advanced PID control,
transistor (PNP) output, 2 loops.Specification: Thermocouple input (K, J, L, T, R, S, B),
ON/OFF or advanced PID control,
manual op-eration,
transistor (NPN) output, 4 loops.Specification: Thermocouple input (J/K),
ON/OFF or advanced PID control,
transistor (PNP) output, 2 loops.Specifications: 16 Kwords without clock.Required for Analog Input and Output Unitss: For two Analog Units CQM1-G7M21. CQM1-LK Special I/O Unit I/O LINK MODULE SYSBUS CQM1LK501.Supply voltage: 100 to 240 V AC, 50/60 Hz (wide range).
Operating voltage range: 85 to 265 V AC.
Output capacity: 5 V DC: 3.6 A(18 W).Supply voltage: 1000 or 230 V AC (selectable), 50/60 Hz CQM1-G7M21.
Operating voltage range: 85 to 265 V AC.
Output capacity: 5 V DC: 6 A 24 V DC: 0.5 A(30 W total, see note).
...More relevant models >>>>