LK Automation Limited
Brand:
OMRON
CQM1H-II101 | OMRON I/O Control Unit CQM1H-II101
OMRON CQM1H-II101 Manual And Instructions
CQM1H-II101 System Manual
CQM1H-II101 System Manual
OMRON CQM1H-II101 Product information and technical parameters：
Brand: OMRON
Name: I/O Control Unit
Model: CQM1H-II101
Connects to left-hand side of Expansion I/O block.
...More relevant models >>>>
CQM1H-II101 System Manual
CQM1H-II101 System Manual
OMRON CQM1H-II101 Product information and technical parameters：
Brand: OMRON
Name: I/O Control Unit
Model: CQM1H-II101
Connects to left-hand side of Expansion I/O block.
I/O points: 512 pts.
Program capacity(words): 15.2 K.
DM capacity (words): 6 K.
EM capacity (words): 6 K.
RS-232C port: YES.Applicable CPU Units: CQM1H-CPU51/61.
Mounting locations and number of Boards: 1 Board can be mounted in either slot 1 or slot 2.
Dimensions: 25 × 110 × 107 mm (W × H × D) OMRON CQM1H-II101.
Weight: 60 g max.I/O points: 256 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K CQM1H-II101
RS-232C port: YES.
Analog setting: YES.Number of outputs: 8 pts.
Input Voltage: 250 VAC, 24 VAC.
Max Switching Current: 2 Amps.
Common Type: Independent.Description: Operates as a DeviceNet slave.Connects to right-hand side of CPU block.Connecting I/O control module and interface module.
Cable length: 0 OMRON CQM1H-II101. 7 m.Number of analog inputs: 4 inputs.
Number of analog outputs: 2 outputs.
Input signal ranges: –10 to 10 V, 0 to 10 V, 0 to 5 V.
Output signal ranges: –10 to 10 V.Number of inputs: 32 pts.
Input Voltage: 12 V DC.
Input Current: 4 mA.Specifications: 4 Kwords without clock.Description : Connects peripheral port to D-sub 9pin connector.
Must be used with CS1W-CN114 (3.3m).Number of inputs: 16 pts OMRON CQM1H-II101.
Input Voltage: 24V DC.
Input Current: 6 mA.Specification: Thermocouple input (K, J, L, T, R, S, B),
ON/OFF or advanced PID control,
manual op-eration,
transistor (NPN) output, 4 loops.Applicable CPU Units: CQM1H-CPU51/61.
Connection location and number of Units: One Unit only.The Unit must be connected between the Power Supply Unit and the CPU Unit.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 170 g max.One of the following connection cables is required for ladder programming.Expands G730 input capacity of G730 reemote master;
adds 32 or 16 inputs,
DIP switch selected CQM1H-II101. Description : Connects peripheral port to RS232C computer port (Use with CS1W-CN114).Analog outputs : 2 points.
Power supply : built-in power supply
Ranges : -10 to + 10V oor 0 to 20mASpecifications: 16 Kwords without clock CQM1H-II101. I/O points: 512 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.
Program capacity(words): 15.2 K.
DM capacity (words): 6 K.
EM capacity (words): 6 K.
RS-232C port: YES.Applicable CPU Units: CQM1H-CPU51/61.
Mounting locations and number of Boards: 1 Board can be mounted in either slot 1 or slot 2.
Dimensions: 25 × 110 × 107 mm (W × H × D) OMRON CQM1H-II101.
Weight: 60 g max.I/O points: 256 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K CQM1H-II101
RS-232C port: YES.
Analog setting: YES.Number of outputs: 8 pts.
Input Voltage: 250 VAC, 24 VAC.
Max Switching Current: 2 Amps.
Common Type: Independent.Description: Operates as a DeviceNet slave.Connects to right-hand side of CPU block.Connecting I/O control module and interface module.
Cable length: 0 OMRON CQM1H-II101. 7 m.Number of analog inputs: 4 inputs.
Number of analog outputs: 2 outputs.
Input signal ranges: –10 to 10 V, 0 to 10 V, 0 to 5 V.
Output signal ranges: –10 to 10 V.Number of inputs: 32 pts.
Input Voltage: 12 V DC.
Input Current: 4 mA.Specifications: 4 Kwords without clock.Description : Connects peripheral port to D-sub 9pin connector.
Must be used with CS1W-CN114 (3.3m).Number of inputs: 16 pts OMRON CQM1H-II101.
Input Voltage: 24V DC.
Input Current: 6 mA.Specification: Thermocouple input (K, J, L, T, R, S, B),
ON/OFF or advanced PID control,
manual op-eration,
transistor (NPN) output, 4 loops.Applicable CPU Units: CQM1H-CPU51/61.
Connection location and number of Units: One Unit only.The Unit must be connected between the Power Supply Unit and the CPU Unit.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 170 g max.One of the following connection cables is required for ladder programming.Expands G730 input capacity of G730 reemote master;
adds 32 or 16 inputs,
DIP switch selected CQM1H-II101. Description : Connects peripheral port to RS232C computer port (Use with CS1W-CN114).Analog outputs : 2 points.
Power supply : built-in power supply
Ranges : -10 to + 10V oor 0 to 20mASpecifications: 16 Kwords without clock CQM1H-II101. I/O points: 512 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.
...More relevant models >>>>