LK Automation Limited
Brand:
OMRON
CS1D-CPU42S | OMRON Programmable Controllers CS1D-CPU42S
OMRON CS1D-CPU42S Manual And Instructions
CS1D-CPU42S datasheetPDF datasheet
CS1D-CPU42S OPERATION MANUAL
CS1D-CPU42S OPERATION MANUAL
CS1D-CPU42S SYSTEM MANUAL
CS1D-CPU42S Communications CommandsHOST CONNECTION MANUAL
CS1D-CPU42S OPERATION MANUAL
CS1D-CPU42S PROGRAMMING MANUAL
CS1D-CPU42S INSTRUCTIONS REFERENCE MANUAL
CS1D-CPU42S Communications CommandsREFERENCE MANUAL
CS1D-CPU42S INSTRUCTIONS REFERENCE MANUAL
OMRON CS1D-CPU42S Product information and technical parameters：
Brand: OMRON
Name: Programmable Controllers
Model: CS1D-CPU42S
Name: CS1D CPU Unit for Single CPU Systems.
Specifications: Number of I/O points,
960 points (2 Racks);
Program capacity, 10 Ksteps;
Data Memory, 64 Kwords(DM: 32 Kwords,
EM: 32 Kwords×1 bank);
LD execution time, 0.04 μs;
Duplex CPUs, --;
Interrupt functions, OK.
Current consumption: 5V system, 0.78A;
26V system, --.
Standards: UC1, N, L, CE.
Redundant CPU Units , Power Supply Units ,
Communications Units ,
and Expansion I/O Cables.
...More relevant models >>>>
CS1D-CPU42S datasheetPDF datasheet
CS1D-CPU42S OPERATION MANUAL
CS1D-CPU42S OPERATION MANUAL
CS1D-CPU42S SYSTEM MANUAL
CS1D-CPU42S Communications CommandsHOST CONNECTION MANUAL
CS1D-CPU42S OPERATION MANUAL
CS1D-CPU42S PROGRAMMING MANUAL
CS1D-CPU42S INSTRUCTIONS REFERENCE MANUAL
CS1D-CPU42S Communications CommandsREFERENCE MANUAL
CS1D-CPU42S INSTRUCTIONS REFERENCE MANUAL
OMRON CS1D-CPU42S Product information and technical parameters：
Brand: OMRON
Name: Programmable Controllers
Model: CS1D-CPU42S
Name: CS1D CPU Unit for Single CPU Systems.
Specifications: Number of I/O points,
960 points (2 Racks);
Program capacity, 10 Ksteps;
Data Memory, 64 Kwords(DM: 32 Kwords,
EM: 32 Kwords×1 bank);
LD execution time, 0.04 μs;
Duplex CPUs, --;
Interrupt functions, OK.
Current consumption: 5V system, 0.78A;
26V system, --.
Standards: UC1, N, L, CE.
Redundant CPU Units , Power Supply Units ,
Communications Units ,
and Expansion I/O Cables.
Unit type: CS1 Special I/O Units.
name: Position control unit.
Specifications: Control method/Control,
output interface, Open-loop control by,
pulse train output/Open-collector output;
Number of control axes, 2 axis.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.25A; 26V, --.
Standards: U, C, N, L, CE OMRON CS1D-CPU42S.
High-speed, High-precision,
positioning with 1, 2, or 4 axes CS1D-CPU42S
Versatile functions and superb,
performance enable the construction,
of compact, high-performance machines.
With its ultra-compact size of 31×90mm,
(W×H),this highly space-efficient Position,
Control Unit(PCU) enables up to 4 axes,
of motor control.Unit type: CS1 Special I/O Units.
name: Position control unit OMRON CS1D-CPU42S.
Specifications: Control method/Control,
output interface, Open-loop control by,
pulse train output/Open-collector output;
Number of control axes, 1 axis.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.25A; 26V, --.
Standards: U, C, N, L, CE.
High-speed, High-precision,
positioning with 1, 2, or 4 axes.
Versatile functions and superb,
performance enable the construction,
of compact, high-performance machines OMRON CS1D-CPU42S.
With its ultra-compact size of 31×90mm,
(W×H),this highly space-efficient Position,
Control Unit(PCU) enables up to 4 axes,
of motor control.I/O bits: 5, 120 (Expan-sion Racks: 7).
Program capacity: 60K steps.
Data memory capacity: 128K words (DM: 32K words, EM: 32K words ×3 banks)Unit type: CS1 CPU Bus Units.
Product Name: MECHATROLINK-II,
compatible Position Control Unit.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications.
Direct operation by ladder,
programming, Control mode:
Position control, speed control,
or torque control; No. of axes: 16.
No. of uniit numbers allocated: 1 CS1D-CPU42S.
Current consumption: 5V, 0.36A; 26V, --.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management.
Control Servos for up to 16 axes,
in a motion networkk with one Position,
Control Unit that supports MECHATROLINK-II CS1D-CPU42S.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association.
name: Position control unit.
Specifications: Control method/Control,
output interface, Open-loop control by,
pulse train output/Open-collector output;
Number of control axes, 2 axis.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.25A; 26V, --.
Standards: U, C, N, L, CE OMRON CS1D-CPU42S.
High-speed, High-precision,
positioning with 1, 2, or 4 axes CS1D-CPU42S
Versatile functions and superb,
performance enable the construction,
of compact, high-performance machines.
With its ultra-compact size of 31×90mm,
(W×H),this highly space-efficient Position,
Control Unit(PCU) enables up to 4 axes,
of motor control.Unit type: CS1 Special I/O Units.
name: Position control unit OMRON CS1D-CPU42S.
Specifications: Control method/Control,
output interface, Open-loop control by,
pulse train output/Open-collector output;
Number of control axes, 1 axis.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.25A; 26V, --.
Standards: U, C, N, L, CE.
High-speed, High-precision,
positioning with 1, 2, or 4 axes.
Versatile functions and superb,
performance enable the construction,
of compact, high-performance machines OMRON CS1D-CPU42S.
With its ultra-compact size of 31×90mm,
(W×H),this highly space-efficient Position,
Control Unit(PCU) enables up to 4 axes,
of motor control.I/O bits: 5, 120 (Expan-sion Racks: 7).
Program capacity: 60K steps.
Data memory capacity: 128K words (DM: 32K words, EM: 32K words ×3 banks)Unit type: CS1 CPU Bus Units.
Product Name: MECHATROLINK-II,
compatible Position Control Unit.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications.
Direct operation by ladder,
programming, Control mode:
Position control, speed control,
or torque control; No. of axes: 16.
No. of uniit numbers allocated: 1 CS1D-CPU42S.
Current consumption: 5V, 0.36A; 26V, --.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management.
Control Servos for up to 16 axes,
in a motion networkk with one Position,
Control Unit that supports MECHATROLINK-II CS1D-CPU42S.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association.
...More relevant models >>>>