One of the following connection cables is required for ladder programming.Specifications: 16 Kwords with clock.Specification: Platinum resistance thermometer input (Pt, JPt),
ON/OFF or advanced PID control,
tran-sistor (NPN) output, 2 loops.Peripheral port to RS-422 conversion cable (length: 0 OMRON CS1W-CN713. 2 m).CQM1-LK Special I/O Unit I/O LINK MODULE SYSBUS CQM1LK501.Supply voltage: 100 to 240 V AC, 50/60 Hz (wide range) CS1W-CN713
Operating voltage range: 85 to 265 V AC.
Output capacity: 5 V DC: 6 A 24 V DC: 0.5 A(30 W total, see note).Specifications: With clock (see below).Applicable CPU Units: CQM1H-CPU51/61.
Pulse inputs: 4 inputs.
External outputs: 4 outputS.
Current consumption (Supplied from Power Supply Unit): 5 V DC, 400 mA max OMRON CS1W-CN713.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 90 g max.
Emergency stop unit: 2 inputs/2 outputs, 4 general-purpose inputs.Number of outputs: 32 pts.
Max. switch-ing capacity: 0.5 A at 24 V DC.
External connector: Connector.
Weight: 210 g max.Supply voltage: 100 to 240 V AC, 50/60 Hz (wide range).
Operating voltage range: 85 to 265 V AC.
Output capacity: 5 V DC: 3 OMRON CS1W-CN713. 6 A(18 W).Supply voltage: 24 V DC.
Operating voltage range: 20 to 28 V DC.
Output capacity: 30 W 5 V DC: 6 A.Expands G730 input capacity of G730 remote master;
adds 32 or 16 inputs,
DIP switch selected.Specification: Platinum resistance thermometer input (Pt100, JPt100),
heater burnout alarm,
manual operation,
ON/OFF or advanced PID control,
transistor (PNP) output, 2 loops.Specification: Platinum resistance thermometer input (Pt, JPt),
ON/OFF or advanced PID control,
tran-sistor (PNP) outtput, 2 loops CS1W-CN713. I/O points: 128 pts.
Program capacity(words): 3.2 K.
DM capacity (words): 1 K.
RS-232C port: NO.Specification: Thermocouple input (K, J, L, T, R, S, B),
ON/OFF or advanced PID control,
manual op-eration,
trannsistor (PNP) output, 4 loops CS1W-CN713. I/O points: 256 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.
ABS interface: Yes.