LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
CS1W-SCB41-V1 | OMRON Module CS1W-SCB41-V1
OMRON CS1W-SCB41-V1 Manual And Instructions
CS1W-SCB41-V1 datasheetPDF datasheet
CS1W-SCB41-V1 Communications CommandsHOST CONNECTION MANUAL
CS1W-SCB41-V1 OPERATION MANUAL
CS1W-SCB41-V1 Communications CommandsREFERENCE MANUAL
CS1W-SCB41-V1 Safety Precautions

OMRON CS1W-SCB41-V1 Product information and technical parameters:
Brand: OMRON
Name: Module
Model: CS1W-SCB41-V1
Specifications: 1 × RS-232C port + 1 × RS-422/485 port, protocol macro function.

Name: CS1D Processcontrol CPU Unit.
Specifications: CPU section,
Equivalent to the CS1D-CPU65H;
Loop control section,
LCB05D Operation method:
Function block method,
Number of function blocks:
500 blocks max.
Minimum operation cycle:
100 ms PID control method:
PID with two degrees of freedom,
(with autotuning function);
Current consumption: 5 V system, 1 OMRON CS1W-SCB41-V1. 04A;
26 V system, -- CS1W-SCB41-V1
Standards: UC1, N, CE.
Redundant CPU Units , Power Supply Units ,
Communications Units ,
and Expansion I/O Cables. Unit type: CS1 CPU Bus Units.
Product Name: MECHATROLINK-II,
compatible Position Control Unit.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications OMRON CS1W-SCB41-V1.
Direct operation by ladder,
programming, Control mode:
Position control, speed control,
or torque control; No. of axes: 16.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.36A; 26V, --.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management.
Control Servos for up to 16 axes,
in a motion network with one Position,
Control Unit that supports MECHATROLINK-II OMRON CS1W-SCB41-V1.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association. Name: I/O Control Unit.
Specifications: Applicable systems,
Duplex CPU, Dual I/O Expansion System only;
Duplexing, Supported;
Online Replacement, Supported;
Mounting Backplane, Expansion Backplane;
Connecting Cable, CS1W-CN@@3,
CS-series Connecting Cable.
Current consumption: 5V system, 0.20A;
26V system, --.
Standards: UC1, CE.
Redundant CPU Units , Power Supply Units ,
Communications Units ,
and Expansion I/O Cables. Product name: CS1 Expansion Backplanes.
Specifications: For CS-series,
Unit only Note: C200H series,
Units cannot be mounted; 10 slots.
Mountable configuration units:
Basic I/O Units, CS-series Basic I/O Unit,
Yes; C200H series Basic I/O Unit, No;
C200H Group-2 High density I/O Unit, No CS1W-SCB41-V1.
Special I/O Units: CS-series Special I/O Unit,
Yes; C200H series Special I/O Unit, No.
CPU Bus Units: CS-series CPU Bus Unit, Yes.
Current consumption: 5V system, 0.233A;
26 V system, -- CS1W-SCB41-V1.
Standards: U, C, N, L, CE.
Multi-application Controllers:
From High-performance Machine C,
Highly Reliable Process Control.


...More relevant models >>>>