LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
D4C-3360 | OMRON Enclosed Switch D4C-3360
OMRON D4C-3360 Manual And Instructions
D4C-3360 datasheetPDF datasheet

OMRON D4C-3360 Product information and technical parameters:
Brand: OMRON
Name: Enclosed Switch
Model: D4C-3360
Ratings: Standard load; 4 A at 30 VDC.
Cable: VCTF oil-resistant cable *1.
Actuator: Center roller lever.
Cable length : 5 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)

Output: SPDT.
Lighting: LED without Voltage Reduction Unit.
Operating voltage: 12 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white.
Item: Momentary operation (Self-resetting).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28 OMRON D4C-3360. 5 mm, the smallest class in the industry.
Detachable Switch D4C-3360
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Output configuration: PNP open collector (+ common).
Contact form: SPST-NC.
Operation indicator: ON when not operated.
Cable length: 1 m.
Optical System Achieves 1-μm Operating Position OMRON D4C-3360.
Repeatability in this 4-way Switch.
No-contact structure for high reliability.
Ceramic materials in measuring part for superior resistance to abrasion.
Two different output types (PNP and NPN) available. ,
Less abrasion and damage of mechanical contacts compared,
to switches with contacts, reducing fluctuation in the output.
More compact than previous OMRON models: 40% less mass,
15% lighter across the operating width OMRON D4C-3360. Actuator: Horizontal-ball plunger.
Item: Basic.
Pretravel (PT): 2.8 mm max.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models. Classification: Momentary operation.
Shape of Operation Unit: 36 dia. 25 dia.
Output: 1.
Operation Unit color: Yellow (-Y) D4C-3360.
Long Service Life with Built-in Z-series.
Basic Switch.
Using a Basic Switch enables direct switching of large-capacity loads.
Shock-absorbing construction of Operation Unit protects the Switch.
Drip-proof Pushbutton consstruction enables use in locations subject to,
splashing water and oil and scattering dust D4C-3360.
Pushbuttons are available in three shapes and six colors.


...More relevant models >>>>
Last one: OMRON D4C-3260
next one: OMRON D4C-3401