LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
D4CC-1003 | OMRON Miniature Limit Switch D4CC-1003
OMRON D4CC-1003 Manual And Instructions
D4CC-1003 datasheetPDF datasheet

OMRON D4CC-1003 Product information and technical parameters:
Brand: OMRON
Name: Miniature Limit Switch
Model: D4CC-1003
Ratings: 1 A at 125 VAC.
LED indicator: Without indicator.
Actuator: Crossroller plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating).
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.)

Type: rectangle.
Screen mode: no segmentation.
Using voltage: DC24V.
Operation Department color: White (using yellow and green LED).
Micro design, the length of the body is only 23mm.
LED has five colors (red, yellow, green, white, and blue).
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient OMRON D4CC-1003. Appearance: Round/Full-guard type A22-G D4CC-1003
Output: SPST-NC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green);
W (white); A (blue); B (black).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks OMRON D4CC-1003.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Appearance: Round/Half-guard type LED voltage-reduction lighting,
(with Voltage Reduction Unit) A22L-H OMRON D4CC-1003.
Output: SPST-NO.
Lighting: LED.
Operating voltage: 100 VAC.
Operation: Momentary operation (self-resetting).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type)) crimp terminals D4CC-1003.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Appearance: Rectangular (M16-A).
Lighting: Incandescent lamp, 12 VAC/VDC.
Degree of protection: IP65 oil-resistant.
Display color symbol: R: red; Y: yyellow; G: green; A: blue;
W: white; PY: pure yellow; PW: pure white D4CC-1003.
Cylindrical 16-dia. Indicator.
Same basic design as the A16 Pushbutton Switch.


...More relevant models >>>>
Last one: OMRON D4CC-1002
next one: OMRON D4CC-1024