LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
D4CC-1032 | OMRON Miniature Limit Switch D4CC-1032
OMRON D4CC-1032 Manual And Instructions
D4CC-1032 datasheetPDF datasheet

OMRON D4CC-1032 Product information and technical parameters:
Brand: OMRON
Name: Miniature Limit Switch
Model: D4CC-1032
Ratings: 1 A at 125 VAC.
LED indicator: Without indicator.
Actuator: Sealed roller plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating).
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.)

Type: printing plate mounting type, with left column.
Driving rod: R type swing lever type.
Terminal specification: printed board, angular.
Contact specifications: 1c.
The minimum size of the long stroke type can be reliably switch
The body part size is 78% of the previous generation product, which is beneficial to the miniaturization of the equipment OMRON D4CC-1032.
No swing bars are also used for easy long stroke specifications (OT reference value: 1 D4CC-10324mm).
Without harmful substances to the environment, the lead type has also been lead-free. Output: SPDT.
Lighting: Non-lighted.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; B: black *2.
Item: Momentary operation (Self-resetting) OMRON D4CC-1032.
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Ratings: 1 A at 30 VDC.
LED indicator: With indicator.
Actuator: Pin plunger.
Many Models Including Roller Lever OMRON D4CC-1032.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating).
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Type: square.
Screen mode: no segmentation.
Using voltage: DC12V.
Operation Department color: yellow.
Micro design, the length of the body is only 23mm.
LED has five colors (red, yellow, green, white, and blue).
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient. Actuator: Short hinge roller lever.
Type: Standard.
Compact, General-purpose Horizontal.
Switches.
Models for Microloads Added to Series.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.),
Incorporates a sswitch with a durable coil spring in a tough,
high precision case D4CC-1032.
Compact and uses a single basic switch for applications where,
strength is required.
Models for microloads and models with operation indicators,
added to series.
Termminal protective cover can be switched to wire cable from,
either the left or right D4CC-1032.
Sealing characteristics that meet IEC IP67 degree of protection.


...More relevant models >>>>
Last one: OMRON D4CC-1031
next one: OMRON D4CC-1033