LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
D4JL-2RFA-C7-01 | OMRON Guard Lock Safety-door Switch/Slide key D4JL-2RFA-C7-01
OMRON D4JL-2RFA-C7-01 Manual And Instructions
D4JL-2RFA-C7-01 datasheetPDF datasheet
D4JL-2RFA-C7-01 INSTRUCTION sheet

OMRON D4JL-2RFA-C7-01 Product information and technical parameters:
Brand: OMRON
Name: Guard Lock Safety-door Switch/Slide key
Model: D4JL-2RFA-C7-01
Release key type: Trapped key *1.
Indicator: Green.
Lock and release types: Mechanical lock Solenoid release.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 3NC+3NC.
Conduit opening: G1/2.
Holding Force of 3,000 N.
Two safety circuits and two monitor contacts provide an,
array of monitoring patterns.
Standard gold-clad contacts enable use with ordinary loads,
and microloads.
Models with trapped keys prevent workers from being locked,
in hazardous work areas.
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas.
IP67 degree of protection.

Actuator: Roller plunger.
Conduit size: 1-conduit; Pg13.5.
Built-in switch mechanism: 1NC/1NO(Snap-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available OMRON D4JL-2RFA-C7-01. )
M12-connector models are also available, saving on labor and,
simplifying replacement D4JL-2RFA-C7-01
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Number of beams: 60.
Protective height: 1,230mm OMRON D4JL-2RFA-C7-01.
Model: PNP.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Classification: Standard models.
Auxiliary monitoring output: Photocoupler outputs *1.
Cable length: 5 m.
Supports ISO 13849-1 (PLe/Safety Category 4).
Can be used on higher risk level applications,
by connecting to Safety Controllers OMRON D4JL-2RFA-C7-01.
Supports a wide range of applications in combination with,
Safety Controller G9SP or Non-contact Door Switch,
Controller G9SX-NS@.
Up to 30 units can be connected.
Ideal for middle to large scale device applications.
Contributes to shortening the time it takes to find,
the cause of failure by the switch''s LED display patterns.
Photocoupler monitor output allows connection to,
a general-purpose PLC (NPN type).
Compatibility with the D40A allows standardization of machine design.
Compact Non-contact Door Switch can be mounted from both sides. Actuator: Arm lever.
Conduit size: 2-conduit; G1/2.
Built-in switch mechanism: 1NC/1NO (Slow-action).
Compact, Plastic-body Safety-dooor D4JL-2RFA-C7-01.
Hinge Switch Designed for Saving.
Space in Machines and Other.
Equipment.
Lineup includes three contact models with 2NC/1NO and.
3NC contact forms in addition to the previous contact forms.
1NC/1NO, and 2NC. Models with MBBB contacts are also available D4JL-2RFA-C7-01.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.


...More relevant models >>>>