LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
D4NH-1CAS | OMRON Safety-door Hinge Switch D4NH-1CAS
OMRON D4NH-1CAS Manual And Instructions
D4NH-1CAS datasheetPDF datasheet
D4NH-1CAS INSTRUCTION sheet

OMRON D4NH-1CAS Product information and technical parameters:
Brand: OMRON
Name: Safety-door Hinge Switch
Model: D4NH-1CAS
Actuator: Shaft.
Conduit size: 1-conduit; Pg13.5.
Built-in switch mechanism: 2NC/1NO (Slow-action).
Compact, Plastic-body Safety-door.
Hinge Switch Designed for Saving.
Space in Machines and Other.
Equipment.
Lineup includes three contact models with 2NC/1NO and.
3NC contact forms in addition to the previous contact forms.
1NC/1NO, and 2NC. Models with MBB contacts are also available.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.

Number of beams: 35.
Protective height: 870mm.
Model: NPN output.
Basic Type with a combination of.
performance and functionality.
Up to three sets of series-connected sensors.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions OMRON D4NH-1CAS. Number of beams: 68.
Protective height: 623mm.
Model: NPN output.
Basic Type with a combination of D4NH-1CAS
performance and functionality.
Up to three sets of series-connected sensors.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions. Compact (104.5 mm), lightweight (1.3 kg),
and easy-to-install Safety Laser Scanner.
Provides a safety circuit of PLd/Safety Category 3 (ISO13849-1) without a,
dedicated controller OMRON D4NH-1CAS.
Type 3 Safety Laser Scanner complies with IEC61496-1/-3.
70 sets of safety zone and warning zone combinations are available,
supporting complicated changes in working environments.
A safety radius up to 4 m and warning zone(s) radius up to 15 m can be set.
The minimum object resolution can be changed to 30, 40, 50 or 70 mm OMRON D4NH-1CAS.
The response time is configurable from 80 ms to a maximum of 680 ms.
Reference Boundary Monitoring function prevents unauthorized changes in,
the scanner position.
Minimal down time, sensor block can be replaced without the need to reprogram. Actuator: Adjustable roller lever, form lock (metal lever, resin roller).
Conduit size: 2-conduit; G1/2.
Built-in switch mechanism: 3NC (Slow-action).
A Series of Pull-reset Models Now.
Available.
Lineup includes three contact models with 2NC/1NO and 3NC,
contact forms in addition to the previous contact forms 1NC/1NO and 2NC.
M12-connector models are available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115, EN81-1 and EN81-2 D4NH-1CAS.
Certified standards: UL, EN (TÜV), and CCC. Number of beams: 7.
Protective height: 320mm.
Model: PNP output.
Basic Type with a combination of.
performance and functionality.
Up to three sets off series-connected sensors D4NH-1CAS.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions.


...More relevant models >>>>
Last one: OMRON D4NH-8BBC
next one: OMRON D4NH-2CAS