LK Automation Limited
Brand:
OMRON
D4NH-2DAS | OMRON Safety-door Hinge Switch D4NH-2DAS
OMRON D4NH-2DAS Manual And Instructions
D4NH-2DAS datasheetPDF datasheet
D4NH-2DAS INSTRUCTION sheet
OMRON D4NH-2DAS Product information and technical parameters：
Brand: OMRON
Name: Safety-door Hinge Switch
Model: D4NH-2DAS
Actuator: Shaft.
Conduit size: 1-conduit; G1/2.
Built-in switch mechanism: 3NC (Slow-action).
Compact, Plastic-body Safety-door.
Hinge Switch Designed for Saving.
Space in Machines and Other.
Equipment.
Lineup includes three contact models with 2NC/1NO and.
3NC contact forms in addition to the previous contact forms.
1NC/1NO, and 2NC. Models with MBB contacts are also available.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
...More relevant models >>>>
D4NH-2DAS datasheetPDF datasheet
D4NH-2DAS INSTRUCTION sheet
OMRON D4NH-2DAS Product information and technical parameters：
Brand: OMRON
Name: Safety-door Hinge Switch
Model: D4NH-2DAS
Actuator: Shaft.
Conduit size: 1-conduit; G1/2.
Built-in switch mechanism: 3NC (Slow-action).
Compact, Plastic-body Safety-door.
Hinge Switch Designed for Saving.
Space in Machines and Other.
Equipment.
Lineup includes three contact models with 2NC/1NO and.
3NC contact forms in addition to the previous contact forms.
1NC/1NO, and 2NC. Models with MBB contacts are also available.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Safety outputs: Instantaneous, --; OFF-delayed, 4 PST-NO.
Auxiliary outputs *1: 1(Semiconductor).
OFF-delay time: *2.
Rated voltage: 24 VDC.
Terminal block type: Spring-cage terminals.
Logical AND Function Adds Flexibility to I/O Expansion.
Facilitates partial or complete control system setup.
Solid-state outputs (excluding Expansion Units) OMRON D4NH-2DAS.
Detailed LED indications enable easy diagnosis D4NH-2DAS
TÜV SÜD certification for compliance,
with IEC/EN61508 (SIL3), EN ISO13849-1 (PLe/Safety Category 4).
Approved by UL and CSA.
New unit joins the Series with the following two additional features:
-OFF-delay time of up to 150 seconds can be set.
-Two logical AND connection inputs. Number of beams: 96 OMRON D4NH-2DAS.
Protective height: 1,950mm.
Model: NPN.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Number of beams: 40.
Protective height: 830mm.
Previously light curtains only offered status indicators.
The three types of indicators on the F3SR-B are not only,
status indicators but enable OMRON D4NH-2DAS.
the user to completely understand the status at a glance,
further enhancing usability. Number of beams: 34.
Protective height: 680mm.
Safety Light Curtains with Durable,
Impact-resistant Body and Long,
20-m Sensing Distance.
MS/MSF4800A Advanced Series.
Programming and Diagnostics Module (PDM) makes it easy,
to set functions.
Series connection is possible only with the MSF4800A.
Blanking can be set.
Muting is possible only with the MSF4800A by using the,
MS4800-RM6 Resource Module.
MS/MSF4800B Basic Series,
Features all necessary basic Safety Light Curtain functions.
Series connection is possible only with the MSF4800B.
Programming and Diagnostics Module (PDM) makes it easy,
too set functions D4NH-2DAS. Number of beams: 120.
Protective height: 2430mm.
New Standard of Safety Light.
Curtain,Offering Both Robustness.
and Reliability.
Robust and compact.
New muting function to increase both productivity and safety.
Alll models designed for global use D4NH-2DAS. PNP/NPN selection by.
DIP switch.
Conforming to major international standards including.
Chinese standard GB 4584.
Auxiliary outputs *1: 1(Semiconductor).
OFF-delay time: *2.
Rated voltage: 24 VDC.
Terminal block type: Spring-cage terminals.
Logical AND Function Adds Flexibility to I/O Expansion.
Facilitates partial or complete control system setup.
Solid-state outputs (excluding Expansion Units) OMRON D4NH-2DAS.
Detailed LED indications enable easy diagnosis D4NH-2DAS
TÜV SÜD certification for compliance,
with IEC/EN61508 (SIL3), EN ISO13849-1 (PLe/Safety Category 4).
Approved by UL and CSA.
New unit joins the Series with the following two additional features:
-OFF-delay time of up to 150 seconds can be set.
-Two logical AND connection inputs. Number of beams: 96 OMRON D4NH-2DAS.
Protective height: 1,950mm.
Model: NPN.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Number of beams: 40.
Protective height: 830mm.
Previously light curtains only offered status indicators.
The three types of indicators on the F3SR-B are not only,
status indicators but enable OMRON D4NH-2DAS.
the user to completely understand the status at a glance,
further enhancing usability. Number of beams: 34.
Protective height: 680mm.
Safety Light Curtains with Durable,
Impact-resistant Body and Long,
20-m Sensing Distance.
MS/MSF4800A Advanced Series.
Programming and Diagnostics Module (PDM) makes it easy,
to set functions.
Series connection is possible only with the MSF4800A.
Blanking can be set.
Muting is possible only with the MSF4800A by using the,
MS4800-RM6 Resource Module.
MS/MSF4800B Basic Series,
Features all necessary basic Safety Light Curtain functions.
Series connection is possible only with the MSF4800B.
Programming and Diagnostics Module (PDM) makes it easy,
too set functions D4NH-2DAS. Number of beams: 120.
Protective height: 2430mm.
New Standard of Safety Light.
Curtain,Offering Both Robustness.
and Reliability.
Robust and compact.
New muting function to increase both productivity and safety.
Alll models designed for global use D4NH-2DAS. PNP/NPN selection by.
DIP switch.
Conforming to major international standards including.
Chinese standard GB 4584.
...More relevant models >>>>