LK Automation Limited
Brand:
OMRON
D4SL-N2QFG-D | OMRON Guard Lock Safety-door Switch/D4SL-N-mounting Slide Key D4SL-N2QFG-D
OMRON D4SL-N2QFG-D Manual And Instructions
D4SL-N2QFG-D datasheetPDF datasheet
D4SL-N2QFG-D INSTRUCTION sheet
OMRON D4SL-N2QFG-D Product information and technical parameters：
Brand: OMRON
Name: Guard Lock Safety-door Switch/D4SL-N-mounting Slide Key
Model: D4SL-N2QFG-D
Release Key Type: Standard (metal).
Wiring method: Terminal block.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Solenoid lock Mechanical release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 6-contact Model,
Insert the built-in switch (N, P, Q or R) into the blank @.
Conduit size (See Note.): G1/2.
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available).
Key holding force of 1,300 N.
It is possible to change the key insertion point.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lock Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames.
The plastic material makes the Slide Key suitable,
for lightweight doors.
...More relevant models >>>>
D4SL-N2QFG-D datasheetPDF datasheet
D4SL-N2QFG-D INSTRUCTION sheet
OMRON D4SL-N2QFG-D Product information and technical parameters：
Brand: OMRON
Name: Guard Lock Safety-door Switch/D4SL-N-mounting Slide Key
Model: D4SL-N2QFG-D
Release Key Type: Standard (metal).
Wiring method: Terminal block.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Solenoid lock Mechanical release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 6-contact Model,
Insert the built-in switch (N, P, Q or R) into the blank @.
Conduit size (See Note.): G1/2.
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available).
Key holding force of 1,300 N.
It is possible to change the key insertion point.
without detaching the head.
Drive solenoids directly from the Controller.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lock Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames.
The plastic material makes the Slide Key suitable,
for lightweight doors.
Number of beams: 76.
Protective height: 1,550mm.
Model: PNP.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Actuator: Adjustable roller lever, form lock (metal lever, rubber roller) OMRON D4SL-N2QFG-D.
Conduit size: 2-conduit; G1/2.
Built-in switch mechanism: 2NC(Snap-action) D4SL-N2QFG-D
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement OMRON D4SL-N2QFG-D.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Operation: press the lock with 40 top rotation reduction.
Contact structure: SPST-NC.
Suitable for installation in the phi 22 panel cutting holes in OMRON D4SL-N2QFG-D.
The forced off structure can be contact welding off circuit.
Simply use the swing bar, you can easily install the closed block.
Two switch units are installed in series, which can greatly improve the wiring efficiency.
The switch unit standard finger protection structure.
Easy installation of round or Y type compression connector. Number of beams: 108.
Protective height: 2190mm.
Model: NPN.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by rreducing errors D4SL-N2QFG-D.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Number of beams: 62.
Protective height: 1265mm.
Model: PNP output.
Basic Type with a combination of.
performance and functionality.
Up to three sets off series-connected sensors D4SL-N2QFG-D.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions.
Protective height: 1,550mm.
Model: PNP.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Actuator: Adjustable roller lever, form lock (metal lever, rubber roller) OMRON D4SL-N2QFG-D.
Conduit size: 2-conduit; G1/2.
Built-in switch mechanism: 2NC(Snap-action) D4SL-N2QFG-D
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement OMRON D4SL-N2QFG-D.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Operation: press the lock with 40 top rotation reduction.
Contact structure: SPST-NC.
Suitable for installation in the phi 22 panel cutting holes in OMRON D4SL-N2QFG-D.
The forced off structure can be contact welding off circuit.
Simply use the swing bar, you can easily install the closed block.
Two switch units are installed in series, which can greatly improve the wiring efficiency.
The switch unit standard finger protection structure.
Easy installation of round or Y type compression connector. Number of beams: 108.
Protective height: 2190mm.
Model: NPN.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by rreducing errors D4SL-N2QFG-D.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Number of beams: 62.
Protective height: 1265mm.
Model: PNP output.
Basic Type with a combination of.
performance and functionality.
Up to three sets off series-connected sensors D4SL-N2QFG-D.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions.
...More relevant models >>>>