LK Automation Limited
Brand:
OMRON
D7F-C03 | OMRON Vibration sensor D7F-C03
OMRON D7F-C03 Product information and technical parameters：
Brand: OMRON
Name: Vibration sensor
Model: D7F-C03
Determine the vibration of equipment and machinery.
With the aid of vibration level can be easily recognized, set the ON/OFF output.
Confirm vibration waveform by AC monitor output.
Sensor part of the use of IP67 protection structure, can also be used in harsh environments.
Can switch acceleration, speed (linear output type).
Using 5 processing modes to determine the abnormal state of high accuracy (manual setting).
Ontology: part of the controller.
Category: linear output.
Type: Standard models.
Connecting method: Wire-saving connector *1.
Model: NPN output.
Applicable wire-saving connector(sold separately):
Type,Master connector, Slave connector; Model, E3X-CN21, E3X-CN22.
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years OMRON D7F-C03 D7F-C03
Power turning to easily set the optimum light level.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects OMRON D7F-C03.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit.
Sensor type: Diffuse-reflective.
Sensing distance: 100 mm.
Connection method: pre-wired.
Model: NPN output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models OMRON D7F-C03.
Models designed for special applications.
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing. Optical system: Diffuse reflective.
Measurement range: Height direction, 210±48 mm;
Width direction, 70 mm (typical).
Resolution: Height direction, 6 μm;
Width direction, 111 μm (70mm/631pixels).
ZG2 debut!
Achieving stable measurement.
through innovative technology. Power supply voltage: 5 to 24 VDC.
Output configuration: NPN open-collector output.
Resolution (pulses/rotattion): 10, 20, 30, 40, 50, 60, 100,
200, 300, 360, 400, 500, 600; 720, 800, 1,000, 1,024;
1,200, 1,500, 1,800, 2,000 D7F-C03.
General-purpose Encoder with.
External Diameter of 40 mm.
Incremental model.
External diameter of 40 mm.
Resolution of up to 2,000 ppr D7F-C03. Detection mode: diffuse reflection type.
Connection: socket type (M12).
Detection range: red light 1mmmm.
Output mode: NPN output.
Connecting method: Wire-saving connector *1.
Model: NPN output.
Applicable wire-saving connector(sold separately):
Type,Master connector, Slave connector; Model, E3X-CN21, E3X-CN22.
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years OMRON D7F-C03 D7F-C03
Power turning to easily set the optimum light level.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects OMRON D7F-C03.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit.
Sensor type: Diffuse-reflective.
Sensing distance: 100 mm.
Connection method: pre-wired.
Model: NPN output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models OMRON D7F-C03.
Models designed for special applications.
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing. Optical system: Diffuse reflective.
Measurement range: Height direction, 210±48 mm;
Width direction, 70 mm (typical).
Resolution: Height direction, 6 μm;
Width direction, 111 μm (70mm/631pixels).
ZG2 debut!
Achieving stable measurement.
through innovative technology. Power supply voltage: 5 to 24 VDC.
Output configuration: NPN open-collector output.
Resolution (pulses/rotattion): 10, 20, 30, 40, 50, 60, 100,
200, 300, 360, 400, 500, 600; 720, 800, 1,000, 1,024;
1,200, 1,500, 1,800, 2,000 D7F-C03.
General-purpose Encoder with.
External Diameter of 40 mm.
Incremental model.
External diameter of 40 mm.
Resolution of up to 2,000 ppr D7F-C03. Detection mode: diffuse reflection type.
Connection: socket type (M12).
Detection range: red light 1mmmm.
Output mode: NPN output.
...More relevant models >>>>