LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
E2A-M08KN04-M1-C2 | OMRON Cylindrical Proximity Sensor E2A-M08KN04-M1-C2
OMRON E2A-M08KN04-M1-C2 Manual And Instructions
E2A-M08KN04-M1-C2 datasheetPDF datasheet

OMRON E2A-M08KN04-M1-C2 Product information and technical parameters:
Brand: OMRON
Name: Cylindrical Proximity Sensor
Model: E2A-M08KN04-M1-C2
Size: M8, Non-shielded.
Sensing distance: 4.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 27 (43).
Output configuration: NPN.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization.

E3JM-DS70M4 detection method: diffuse reflection type,
Connection: terminal plate,
Detection range: 700mm.
Output status: ON into the light; light shading ON; switch conversion type.
Output: relay.
2 types of cost reductionItem: RS-232C Cable for personal computer.
Cable length: 2m.
To achieve a compact Sensor Head and high-resolution measurements,
the ZW Series uses a white light confocal principle to detect objects OMRON E2A-M08KN04-M1-C2 E2A-M08KN04-M1-C2
This principle is described below. Sensing method: Through-beam (Emitter + Receiver).
Connection method: Standard M8 connector.
Sensing distance: 10 m.
Model: PNP output .
The Standard for Photoelectric Sensors,
with a Secure Track Record of One,
Million Sold Yearly OMRON E2A-M08KN04-M1-C2.
Long sensing distance of 30 m for Through-beam Models, 4 m for,
Retro-reflective Models, and 1 m for Diffuse-reflective Models.
Mechanical axis and optical axis offset of less than ±2.5° simplifies,
optical axis adjustment.
High stability with unique algorithm that prevents interference of,
external light. Appearance: T-shaped, slot center 10 mm.
Sensing method: F-shaped.
Connecting method: Connector(4 poles) OMRON E2A-M08KN04-M1-C2.
Sensing distance: 5 mm (slot width).
Output configuration: Dark-ON/Light-ON (selectable).
Indicator mode: Incident light.
Model: NPN output.
Global Standard Slot-type.
photomicrosensors with 50- to,
100-mA direct switching capacity.
Series includes models that enable switching between,
dark-ON and light-ON operation.
Response frequency as high as 1 kHz.
Easy operation monitoring with bright light indicator.
Wide operating voltage range: 5 to 24 VDC.
Models in which the light indicator turns ON for dark-ON,
operation are also available.
A wide range of variations in eight different shapes.
Flexible robot cable is provided as a standard feature. Stable detection of chip components in 0402 dimensions.
Minimum detection object 0.15mm (cube).
Built in small lens, light 7mm wide uniform light.
Even smaller pieces will not be spared.
And, with a response rate of 135 s and other levels of the highest detection performance,
Even the latest 0402 size tiny chips are able to accurately capture.
Ultra small sensor head, can be installed into a small space.
When the electronic component grade sorting and the like are arranged in parallel, it is helpful to the miniaturization of the device.
Adjustable time timer.
Equipped with timer function can be set time.
Control devvice to transmit the signal to the back section E2A-M08KN04-M1-C2.
In addition, due to the built-in counter function, therefore, you can also set the number of output signals.
Automatic compensation detecting state
Equipped with dust and dirt detecttion according to the amount of light to change light automatic compensation function E2A-M08KN04-M1-C2.
Always maintain the detection performance in the best condition.


...More relevant models >>>>