LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
E2A-S08KS02-WP-C2 2M | OMRON Cylindrical Proximity Sensor E2A-S08KS02-WP-C2 2M
OMRON E2A-S08KS02-WP-C2 2M Manual And Instructions
E2A-S08KS02-WP-C2 2M datasheetPDF datasheet

OMRON E2A-S08KS02-WP-C2 2M Product information and technical parameters:
Brand: OMRON
Name: Cylindrical Proximity Sensor
Model: E2A-S08KS02-WP-C2 2M
Size: M8, Shielded.
Sensing distance: 2.0 mm.
Connection: Pre-wired.
Body material: Stainless steel.
Thread length (overall length): 27 (40).
Output configuration: NPN.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization.

Field of view: Wide View (Long-distance).
Number of pixels: 760,000 pixels.
Monochrome: NPN.
Field of view/Installation distance: Refer to figure 7 on p.20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller OMRON E2A-S08KS02-WP-C2 2M E2A-S08KS02-WP-C2 2M
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series. Sensing method: Diffuse-reflective Sensors.
Appearance: Horizontal.
Connection method: Pre-wired.
Sensing distance: 100 mm (wide view).
Functions: --.
Model: PNP output.
Ordering Information OMRON E2A-S08KS02-WP-C2 2M.
Built-in Amplifier Photoelectric Sensors. Power supply voltage: 12 to 24 VDC.
Output configuration: Open-collector output.
Detects the Rotary Encoder Direction.
Input phase difference signal from the Encoder to detect the,
direction of rotation.
High-speed response at 120 kHz.
Mounts to DIN Track. Thin design enables superb mounting efficiency.
Front-panel switch enables reversing phase Z logic OMRON E2A-S08KS02-WP-C2 2M.
Enables connecting either voltage outputs or open-collector outputs. Appearance: Close mounting.
Sensing method: Throughbeam type(with slot).
Connecting method: Connector(4 poles).
Sensing distance: 5 mm (slot width).
Output configuration: Light-ON.
Indicator mode: Incident light.
Model: NPN output.
Global Standard Slot-type.
photomicrosensors with 50- to,
100-mA direct switching capacity.
Series includes models that enable switching between,
dark-ON and light-ON operation.
Response frequency as high as 1 kHz.
Easy operation monitoring with bright light indicator.
Wide operating voltage range: 5 to 24 VDC.
Models in which the light indicator turns ON for dark-ON,
operation are also available.
A wide range of variations in eight different shapes.
Flexible robot cable is provided as a standard feature. Fitting materials: Stainless steel (SUS304).
Count: 1.
Accessories: Description, Holder (upper) Holder,
(lower) Pipe Bolts M4 × 12 with Hexagonal holes,
Bolts M4 × 30 with hexagonal holes,
Phillips screws M3 × 12 (with spring and plain washers),
Spring washeer M4 Plain washer M4 Nuts M4;
Material, Heat-resistant ABS resin, 66 nylon,
Stainless steel (SUS304), Iron, nickel plating,
Iron, nickel plating, Stainless steel (SUS304),
Iron, nickel plating, Iron, nickel plating,
Iron, nickel plating; Count, 1, 1, 1, 2, 1, 2, 1, 1, 3 E2A-S08KS02-WP-C2 2M E2A-S08KS02-WP-C2 2M.
Applicable sensor (mounting pitch on sensor side): E3Z (25.4) E39-R1/E39-R3.
Page: Dimensions, 9.


...More relevant models >>>>