LK Automation Limited
Brand:
OMRON
E2A-S08LS02-WP-C1 2M | OMRON Cylindrical Proximity Sensor E2A-S08LS02-WP-C1 2M
OMRON E2A-S08LS02-WP-C1 2M Manual And Instructions
E2A-S08LS02-WP-C1 2M datasheetPDF datasheet
OMRON E2A-S08LS02-WP-C1 2M Product information and technical parameters：
Brand: OMRON
Name: Cylindrical Proximity Sensor
Model: E2A-S08LS02-WP-C1 2M
Size: M8, Shielded.
Sensing distance: 2.0 mm.
Connection: Pre-wired.
Body material: Stainless steel.
Thread length (overall length): 49 (62).
Output configuration: NPN.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization.
...More relevant models >>>>
E2A-S08LS02-WP-C1 2M datasheetPDF datasheet
OMRON E2A-S08LS02-WP-C1 2M Product information and technical parameters：
Brand: OMRON
Name: Cylindrical Proximity Sensor
Model: E2A-S08LS02-WP-C1 2M
Size: M8, Shielded.
Sensing distance: 2.0 mm.
Connection: Pre-wired.
Body material: Stainless steel.
Thread length (overall length): 49 (62).
Output configuration: NPN.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization.
Type: Shielded.
Appearance: Cylindrical, 8 dia. × 22 mm.
Sensing distance: 2 mm.
Repeat accuracy: 1 μm.
Cable specification: With Protective Spiral Tube.
Proximity Sensor with Separate.
Amplifier Enables Easily Making High.
precision Sensitivity Settings.
Wide variety of Sensor Heads to select according to the,
application OMRON E2A-S08LS02-WP-C1 2M. Flexible cables are used between Preamplifiers,
and Amplifier Units of the Sensor Heads E2A-S08LS02-WP-C1 2M
High resistance to changes in ambient temperature.
Temperature characteristics of 0.08%/°C (for 5.4-dia. models).
Make simple and reliable detection settings with micron,
level precision using the teaching function.
Check the sensing excess gain level on the digital display OMRON E2A-S08LS02-WP-C1 2M.
Support for high-precision positioning and screening with,
fine positioning to maximize variations.
The E2C-EDA0 supports an EtherCAT Sensor,
Communications Unit or CompoNet Sensor,
Communications Unit. Item: FZ4 Series Controllers; Quad Processing High-speed Controllers.
Descriptions: Controllers integrated with LCD.
High-Grade Proc'' Items: --.
No.of cameras: 2.
Output: PNP.
Remarks: With touch pen OMRON E2A-S08LS02-WP-C1 2M.
Speed and accuracy determine the basic,
performance of sensing.Usability efficiently,
puts that performance to work.OMRON’s FZ,
Series of Vision Sensors represent an evolu,
tionary journey that takes these three aspects,
from the past and into the future to allow you,
to increase quality. Detection mode: diffuse reflection type.
Connection: socket type (M12).
Detection range: red light 1mmmm.
Output mode: PNP output. Appearance: Shielded, M18.
Sensing distance: 5 mm.
Output configuration : AC 2-wire.
Operation mode: NO.
Inductive Profoximity Sensor with.
Chemical-resistant Fluorooresin Case E2A-S08LS02-WP-C1 2M.
Housing and mounting are made of Fluororesin resistant to chemicals.
Maximum sensing distance: 10 mm. E3F3-D11 detection method: diffuse reflection type,
Wire lead out type,
Type: Plastic appearance; NPN output,
Threaded cylindrical phhotoelectric sensor, built-in amplifier,
Photoelectric sensor with proximity sensor appearance
High anti interference with optoelectronic -IC technology
Appearance: Cylindrical, 8 dia. × 22 mm.
Sensing distance: 2 mm.
Repeat accuracy: 1 μm.
Cable specification: With Protective Spiral Tube.
Proximity Sensor with Separate.
Amplifier Enables Easily Making High.
precision Sensitivity Settings.
Wide variety of Sensor Heads to select according to the,
application OMRON E2A-S08LS02-WP-C1 2M. Flexible cables are used between Preamplifiers,
and Amplifier Units of the Sensor Heads E2A-S08LS02-WP-C1 2M
High resistance to changes in ambient temperature.
Temperature characteristics of 0.08%/°C (for 5.4-dia. models).
Make simple and reliable detection settings with micron,
level precision using the teaching function.
Check the sensing excess gain level on the digital display OMRON E2A-S08LS02-WP-C1 2M.
Support for high-precision positioning and screening with,
fine positioning to maximize variations.
The E2C-EDA0 supports an EtherCAT Sensor,
Communications Unit or CompoNet Sensor,
Communications Unit. Item: FZ4 Series Controllers; Quad Processing High-speed Controllers.
Descriptions: Controllers integrated with LCD.
High-Grade Proc'' Items: --.
No.of cameras: 2.
Output: PNP.
Remarks: With touch pen OMRON E2A-S08LS02-WP-C1 2M.
Speed and accuracy determine the basic,
performance of sensing.Usability efficiently,
puts that performance to work.OMRON’s FZ,
Series of Vision Sensors represent an evolu,
tionary journey that takes these three aspects,
from the past and into the future to allow you,
to increase quality. Detection mode: diffuse reflection type.
Connection: socket type (M12).
Detection range: red light 1mmmm.
Output mode: PNP output. Appearance: Shielded, M18.
Sensing distance: 5 mm.
Output configuration : AC 2-wire.
Operation mode: NO.
Inductive Profoximity Sensor with.
Chemical-resistant Fluorooresin Case E2A-S08LS02-WP-C1 2M.
Housing and mounting are made of Fluororesin resistant to chemicals.
Maximum sensing distance: 10 mm. E3F3-D11 detection method: diffuse reflection type,
Wire lead out type,
Type: Plastic appearance; NPN output,
Threaded cylindrical phhotoelectric sensor, built-in amplifier,
Photoelectric sensor with proximity sensor appearance
High anti interference with optoelectronic -IC technology
...More relevant models >>>>