LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
E2B-M12KN08-WZ-C2 2M | OMRON Proximity sensor E2B-M12KN08-WZ-C2 2M
OMRON E2B-M12KN08-WZ-C2 2M Manual And Instructions
E2B-M12KN08-WZ-C2 2M datasheetPDF datasheet
E2B-M12KN08-WZ-C2 2M datasheetPDF datasheet

OMRON E2B-M12KN08-WZ-C2 2M Product information and technical parameters:
Brand: OMRON
Name: Proximity sensor
Model: E2B-M12KN08-WZ-C2 2M
Size: M12 (brass), two - fold range, non - shielded type.
Detection range: 8mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: Standard type.
Output type: NPN.
Action mode NC.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
The oil spray test was carried out on the condition of the work site.
Simulation test was carried out in the environment of high oil mist concentration.

E32-TC200F type: standard type; standard,
Specialty: M3 screw (small) with casing,
Shape / detection distance (mm): 270; 220; 125 (50),
Bending radius (mm): R10.
Standard test object (minimum test object) (mm) 1: 1 (0.0005),
Fiber element for meeting diversified needsSensing method: Narrow-beam reflective OMRON E2B-M12KN08-WZ-C2 2M.
Connection method: Connector (M8, 4pins).
Sensing distance: 90±30 mm E2B-M12KN08-WZ-C2 2M
Model: NPN output.
Small 2.5-mm-diameter Spot Ideal for.
Detecting Small Workpieces.
Tiny workpieces as little as 0.1 mm in diameter can be,
detected with the 2.5-mm-dia. spot.
The narrow beam enables sensing from small slots or holes.
The small spot of light enables visual checking of sensing,
spot position.
IP67 degree of protection, mutual interference prevention,
and EN standard compliance OMRON E2B-M12KN08-WZ-C2 2M. Appearance: Close-mounting.
Sensing method: Through beam type (with slot).
Connecting method: Connector model (4 poles).
Sensing distance: 5 mm (slot width).
Operating mode: Dark-ON/Light-ON (2 outputs).
Indicator mode: Incident light.
Model: NPN output.
Built-in connector enables,
downsizing and easier connection OMRON E2B-M12KN08-WZ-C2 2M.
Protective circuit for safe operation.
A built-in connector minimizes the shape and dimensional,
requirements.
Two outputs: light-ON and dark-ON.
Complete lineup including seven different shapes.
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator can be seen from many directions to enable,
installation in more locations.
Connector with lock that mates with commercially available,
connectors. Item: FZ4 Series Controllers; Quad Processing High-speed Controllers.
Descriptions: Controllers integrated with LCD.
High-GGrade Proc'' Items: -- E2B-M12KN08-WZ-C2 2M.
No.of cameras: 4.
Output: PNP.
Remarks: With touch pen.
Speed and accuracy determine the basic,
performance of sensing.Usability efficiently,
puts that performance to work.OMRON’s FZ,
Series of Visiion Sensors represent an evolu,
tionary journey that takes these three aspects,
from the past and into the future to allow you,
to increase quality E2B-M12KN08-WZ-C2 2M.


...More relevant models >>>>