LK Automation Limited
Brand:
OMRON
E2B-M12LS04-M1-B2 | OMRON Proximity Sensors E2B-M12LS04-M1-B2
OMRON E2B-M12LS04-M1-B2 Manual And Instructions
E2B-M12LS04-M1-B2 datasheetPDF datasheet
E2B-M12LS04-M1-B2 datasheetPDF datasheet
OMRON E2B-M12LS04-M1-B2 Product information and technical parameters：
Brand: OMRON
Name: Proximity Sensors
Model: E2B-M12LS04-M1-B2
Size: M12 (Brass); Double; Shielded (See note 2.).
Sensing distance: 4 mm.
Connecting method (See note 1.): M12 Connector.
Body length: Long.
Output configuration: PNP.
Operation mode NC.
A new generation in global applications.
...More relevant models >>>>
E2B-M12LS04-M1-B2 datasheetPDF datasheet
E2B-M12LS04-M1-B2 datasheetPDF datasheet
OMRON E2B-M12LS04-M1-B2 Product information and technical parameters：
Brand: OMRON
Name: Proximity Sensors
Model: E2B-M12LS04-M1-B2
Size: M12 (Brass); Double; Shielded (See note 2.).
Sensing distance: 4 mm.
Connecting method (See note 1.): M12 Connector.
Body length: Long.
Output configuration: PNP.
Operation mode NC.
A new generation in global applications.
Sensor type: Diffuse-reflective.
Sensing distance: 100 mm.
Connection method: M12 connector.
Model: NPN output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications OMRON E2B-M12LS04-M1-B2.
Non-stop detection.
High quality and reliability E2B-M12LS04-M1-B2
High EMC protection.
High light immunity.
Robust and waterproof housing. Appearance: Unshielded.
Sensing distance: 1.5 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NO.
Standard Flat Sensors in.
Many Different Variations.
Only 6 mm thick yet provides a sensing,
distance of 3 mm (TL-W3MC1) OMRON E2B-M12LS04-M1-B2.
Aluminum die-cast models also available. Appearance: T-shaped, slot center 7 mm.
Sensing method: Through beam type (with slot).
Connecting method: Connector model (4 poles).
Sensing distance: 5 mm (slot width).
Operating mode: Dark-ON/Light-ON (2 outputs).
Indicator mode: Incident light.
Model: PNP output.
Built-in connector enables,
downsizing and easier connection.
Protective circuit for safe operation OMRON E2B-M12LS04-M1-B2.
A built-in connector minimizes the shape and dimensional,
requirements.
Two outputs: light-ON and dark-ON.
Complete lineup including seven different shapes.
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator can be seen from many directions to enable,
installation in more locations.
Connector with lock that mates with commercially available,
connectors. Optical system: Diffuse reflective.
Beam shape: Spot beam.
Sensing distance: 100±40 mm . E2B-M12LS04-M1-B2.
Resolution: 16 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Size: M8(Stainless steel)(See note 2.); Double; Shielded.
Sensing distance: 2 mm.
Connnecting method (See note 1 E2B-M12LS04-M1-B2. ): Pre-wired.
Body length: Short.
Output configuration: PNP.
Operation mode NO.
A new generation in global applications.
Sensing distance: 100 mm.
Connection method: M12 connector.
Model: NPN output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications OMRON E2B-M12LS04-M1-B2.
Non-stop detection.
High quality and reliability E2B-M12LS04-M1-B2
High EMC protection.
High light immunity.
Robust and waterproof housing. Appearance: Unshielded.
Sensing distance: 1.5 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NO.
Standard Flat Sensors in.
Many Different Variations.
Only 6 mm thick yet provides a sensing,
distance of 3 mm (TL-W3MC1) OMRON E2B-M12LS04-M1-B2.
Aluminum die-cast models also available. Appearance: T-shaped, slot center 7 mm.
Sensing method: Through beam type (with slot).
Connecting method: Connector model (4 poles).
Sensing distance: 5 mm (slot width).
Operating mode: Dark-ON/Light-ON (2 outputs).
Indicator mode: Incident light.
Model: PNP output.
Built-in connector enables,
downsizing and easier connection.
Protective circuit for safe operation OMRON E2B-M12LS04-M1-B2.
A built-in connector minimizes the shape and dimensional,
requirements.
Two outputs: light-ON and dark-ON.
Complete lineup including seven different shapes.
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator can be seen from many directions to enable,
installation in more locations.
Connector with lock that mates with commercially available,
connectors. Optical system: Diffuse reflective.
Beam shape: Spot beam.
Sensing distance: 100±40 mm . E2B-M12LS04-M1-B2.
Resolution: 16 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Size: M8(Stainless steel)(See note 2.); Double; Shielded.
Sensing distance: 2 mm.
Connnecting method (See note 1 E2B-M12LS04-M1-B2. ): Pre-wired.
Body length: Short.
Output configuration: PNP.
Operation mode NO.
A new generation in global applications.
...More relevant models >>>>