LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
E2C-EV05-F | OMRON High Precision Positioning Inductive Proximity Sensor E2C-EV05-F
OMRON E2C-EV05-F Manual And Instructions
E2C-EV05-F datasheetPDF datasheet

OMRON E2C-EV05-F Product information and technical parameters:
Brand: OMRON
Name: High Precision Positioning Inductive Proximity Sensor
Model: E2C-EV05-F
Type: Shielded.
Appearance: Flat, 30 × 14 × 4.8 mm.
Sensing distance: 5 mm.
Repeat accuracy: 2 μm.
Cable specification: Free cutting .
Proximity Sensor with Separate.
Amplifier Enables Easily Making High.
precision Sensitivity Settings.
Wide variety of Sensor Heads to select according to the,
application. Flexible cables are used between Preamplifiers,
and Amplifier Units of the Sensor Heads.
High resistance to changes in ambient temperature.
Temperature characteristics of 0.08%/°C (for 5.4-dia. models).
Make simple and reliable detection settings with micron,
level precision using the teaching function.
Check the sensing excess gain level on the digital display.
Support for high-precision positioning and screening with,
fine positioning to maximize variations.
The E2C-EDA0 supports an EtherCAT Sensor,
Communications Unit or CompoNet Sensor,
Communications Unit.

Name: Special Reflector for E3ZM-B.
Directional angle: 30° min.
Ambient operating temperature range: -25 to 55°C.
Ambient storage temperature range: 0 to 40°C.
Ambient operating humidity range: 35% to 85%.
Ambient storage humidity range: 35% to 85%.
Degree of protection: --.
Accessories: Phillips screws M3 × 8, spring washers M3, nuts M3 OMRON E2C-EV05-F. Appearance: Unshielded.
Sensing surface: Top E2C-EV05-F
Sensing distance: 1.6 mm.
Model: Operation mode, NC.
Advanced Performance and Wide.
Range of Selections in a Super.
compact Size.
Only 5.5 × 5.5 mm with a built-in Amplifier.
Maximum sensing distance: 2.5 mm. Stable detection even with,
workpiece fluctuations.
Response frequency: 1 kHz.
Low current consumption OMRON E2C-EV05-F. Size: Shielded, M8.
Sensing distance: 1.5 mm.
Model: Output configuration: NPN NC.
Highly Durable Proximity Sensor for.
Tough Environments.
Completely stainless-steel housing.
Aluminum chip immunity.
Embedding installation to metal (steel) fittings.
Chemical resistance certified by Ecolab Europe.
Lineup includes pre-wire models and DC 3-wire NPN output,
models with fluororesin coating OMRON E2C-EV05-F. Appearance: Shielded, M30.
Sensing distance: 15 mm.
Model: Output configuration: NPN NO.
Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
with reduced problems due to workpiece collisions.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature. Appearance: Standard.
Sensing method: Through-beam type (with slot).
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Light-ON.
Indicator mode: Incident light.
Model: PNP output.
Slim, Compact Photomicrosensor.
that is still easy to use.
Compact, thin profile enables dennse mounting E2C-EV05-F.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC. Appearance: Unshielded, M12.
Sensing distance: 12 mm.
Model: Operation mode, NC.
Proximity Sensor with a Long Screw Length.
Increased tigghtening strength E2C-EV05-F. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.


...More relevant models >>>>
Last one: OMRON E2C-EV05
next one: OMRON E2C-EV05-S