Appearance: 6.5 dia.
Sensing distance: 2 mm.
Connecting method: M8 Pre-wired Connector Models (0.3 m).
Cable specifications: PVC (oil-resistant).
Operation mode: NO.
Wire color /pin arrangement: 1: +V, 3: 0 V, 4: Control output.
Model: PNP output.
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
108 model variations are available.
objects: 5 kHz max.
Four indicator lamps for easier indicator positioning.
installation.
breakage is available (M4, M5 only).
or with robot (bending-resistant) cables.
E32-DC200B4R type: standard type; soft (new standard),
Specialty: M6 screw with casing,
Bending radius (mm): R; R1.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsItem: FZ4 Series Controllers; Standard Controllers.
Descriptions: Box-type controllers OMRON E2E-C06S02-CJ-B1 0.3M.
High-Grade Proc'' Items: o.
No.of cameras: 2.
Output: NPN.
Remarks: --
E2E-C06S02-CJ-B1 0.3M
Speed and accuracy determine the basic,
performance of sensing.Usability efficiently,
puts that performance to work.OMRON’s FZ,
Series of Vision Sensors represent an evolu,
tionary journey that takes these three aspects,
from the past and into the future to allow you,
to increase quality. E3JK-D31 diffuse reflection type,
E3JK direct current mode: mode; ON,
Miniature amplifier built-in type photoelectric switchFitting materials: Stainless steel (SUS304) OMRON E2E-C06S02-CJ-B1 0.3M.
Count: 1.
Accessories: Description, xagonal bolts M4 (with spring and plain washers); Material, Iron, zinc plating; Count, 2.
Applicable sensor (mounting pitch on sensor side): E3S-C (25.4).
Page: Dimensions, 8.
Appearance: Shielded, M12.
Sensing distance: 4 mm OMRON E2E-C06S02-CJ-B1 0.3M.
Output: NPN.
Model: Operation mode NO.
Aluminum and Iron Both.
Detectable from Long Distances. Appearance: Shielded, M30.
Sensing distance: 10 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models. Shape: Flat.
Dimensions: 30 x 14 x 4.8 mm.
Sensing distance: 4 mm.
Resolution: 1 μm.
High-accuracy Detection of Metal Workpiece Dissplacement E2E-C06S02-CJ-B1 0.3M.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching).
Easily perform calculation for two Sensors by using a Calculating Unit E2E-C06S02-CJ-B1 0.3M.
Prevent mutual interference for up to five Units by using a Calculating Unit.