LK Automation Limited
Brand:
OMRON
E2E2-X10C2 | OMRON Long-barrel Inductive Proximity Sensor E2E2-X10C2
OMRON E2E2-X10C2 Manual And Instructions
E2E2-X10C2 datasheetPDF datasheet
OMRON E2E2-X10C2 Product information and technical parameters：
Brand: OMRON
Name: Long-barrel Inductive Proximity Sensor
Model: E2E2-X10C2
Appearance: Shielded, M30.
Sensing distance: 10 mm.
Model: Operation mode, NC.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.
...More relevant models >>>>
E2E2-X10C2 datasheetPDF datasheet
OMRON E2E2-X10C2 Product information and technical parameters：
Brand: OMRON
Name: Long-barrel Inductive Proximity Sensor
Model: E2E2-X10C2
Appearance: Shielded, M30.
Sensing distance: 10 mm.
Model: Operation mode, NC.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.
Fitting materials: Iron, zinc plating.
Count: 1.
Accessories: Description, Slotted/Phillips screws M4 × 30,
(with spring and plain washers)Nuts M4;
Material, Iron, nickel plating; Count, 2 .
Applicable sensor (mounting pitch on sensor side): E3JM (40).
Page: Dimensions, 7. The ultra small size, high performance and rich models OMRON E2E2-X10C2.
5.5mm ultra small built-in amplifier.
Maximum detection distance 2 E2E2-X10C25mm. Workpiece shaking can also be stable detection.
Response frequency 1kHz.
Low consumption current.
Category: DC 2 wire type.
Shape: non shield.
Detection surface: below.
Detection range: 2.5mm.
Action mode: NO. Size: M12, Shielded.
Sensing distance: 4.0 mm.
Connection: M12 connector OMRON E2E2-X10C2.
Body material: Brass.
Thread length (overall length): 56 (70).
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels) OMRON E2E2-X10C2.
Modular construction simplifies customization. E32-D11U type: standard type; coating,
Specialty: M6 screw fluoride coating,
Bending radius (mm): U; R4.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsE3JM-10M4T detection methods: the firing pattern,
Connection: terminal plate,
Detection range: 10m.
Output status: ON into the light; light shading ON; switch conversion type.
Function: timer,
Output: relay.
2 types of cost reductionFitting materials: Stainless steel(SUS304).
Count: 1 .
Accessories: Description, Phillips screw Nutt plat;
Material, Stainless steel Stainless steel;
Count, 2, 1 E2E2-X10C2.
Applicable sensor (mounting pitch on sensor side): ZX1-LD300, ZX1-LD600@ @.
Page: Dimensions, 16. E32-D24R type: standard type; soft (new standard),
Features: with 2 cyllinder side (small),
Bending radius (mm): R; R1 E2E2-X10C2.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needs
Count: 1.
Accessories: Description, Slotted/Phillips screws M4 × 30,
(with spring and plain washers)Nuts M4;
Material, Iron, nickel plating; Count, 2 .
Applicable sensor (mounting pitch on sensor side): E3JM (40).
Page: Dimensions, 7. The ultra small size, high performance and rich models OMRON E2E2-X10C2.
5.5mm ultra small built-in amplifier.
Maximum detection distance 2 E2E2-X10C25mm. Workpiece shaking can also be stable detection.
Response frequency 1kHz.
Low consumption current.
Category: DC 2 wire type.
Shape: non shield.
Detection surface: below.
Detection range: 2.5mm.
Action mode: NO. Size: M12, Shielded.
Sensing distance: 4.0 mm.
Connection: M12 connector OMRON E2E2-X10C2.
Body material: Brass.
Thread length (overall length): 56 (70).
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels) OMRON E2E2-X10C2.
Modular construction simplifies customization. E32-D11U type: standard type; coating,
Specialty: M6 screw fluoride coating,
Bending radius (mm): U; R4.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsE3JM-10M4T detection methods: the firing pattern,
Connection: terminal plate,
Detection range: 10m.
Output status: ON into the light; light shading ON; switch conversion type.
Function: timer,
Output: relay.
2 types of cost reductionFitting materials: Stainless steel(SUS304).
Count: 1 .
Accessories: Description, Phillips screw Nutt plat;
Material, Stainless steel Stainless steel;
Count, 2, 1 E2E2-X10C2.
Applicable sensor (mounting pitch on sensor side): ZX1-LD300, ZX1-LD600@ @.
Page: Dimensions, 16. E32-D24R type: standard type; soft (new standard),
Features: with 2 cyllinder side (small),
Bending radius (mm): R; R1 E2E2-X10C2.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needs
...More relevant models >>>>