LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
E2EH-X7B1-M1 | OMRON Proximity Sensor E2EH-X7B1-M1
OMRON E2EH-X7B1-M1 Manual And Instructions
E2EH-X7B1-M1 datasheetPDF datasheet
E2EH-X7B1-M1 INSTRUCTION sheet

OMRON E2EH-X7B1-M1 Product information and technical parameters:
Brand: OMRON
Name: Proximity Sensor
Model: E2EH-X7B1-M1
Appearance: Shielded, M18.
Sensing distance: 7 mm.
Output configuration: DC 3-wire (PNP).
Operation mode: NO.
Proximity Sensor Ideal for the Food and Beverage Industry.

Amplifier Unit.
Separate Amplifier Sensor with.
Sensitivity Adjustment.
Compact design with smaller Sensor Head.
Heat-resistance model available for application between.
-10 and 200°C. Connection method: Pre-wired.
Cable length: 5 m.
Sensing distance: 300 ± 150 mm.
Model: NPN output.
A CMOS Laser Sensor That’s OMRON E2EH-X7B1-M1.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments E2EH-X7B1-M1
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm. Appearance: Unshielded, M18.
Sensing distance: 14 mm.
Model: Operation mode, NC.
Proximity Sensor with a Long Screw Length OMRON E2EH-X7B1-M1.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models. E3JK-5S3 detection methods: the firing pattern,
Connection mode: lead wire,
Detection range: 5m.
Output state: when the light into the ON; light shading ON.
Output: DC no contact,
2 types of cost reductionE3JM-DS70M4 detection method: diffuse reflection type,
Connection: terminal plate,
Detection range: 700mm OMRON E2EH-X7B1-M1.
Output status: ON into the light; light shading ON; switch conversion type.
Output: relay.
2 types of cost reductionAppearance: Unshielded.
Sensing surface: Front.
Sensing distance: 1.6 mm.
Output configuration: PNP.
Model: Operation mode, NC.
Advanced Performance and Wide.
Range of Selections in a Super.
compact Size.
Only 5.5 × 5.5 mm with a built-in Amplifier.
Maximum sensing distance: 2.5 mm. Stable detection even with,
workpiece fluctuations.
Response frequency: 1 kHz.
Low current consumption. Size: M12 (brass), single distance, non shield type.
Detection distance: 20mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: long thread type.
Output type: PNP.
Action mode NO.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to pricce ratio E2EH-X7B1-M1.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
Thhe oil spray test was carried out on the condition of the work site E2EH-X7B1-M1.
Simulation test was carried out in the environment of high oil mist concentration.


...More relevant models >>>>