LK Automation Limited
Brand:
OMRON
E2EZ-X8D1-M1TGJ 0.3M | OMRON Chip-immune Inductive Proximity Sensor E2EZ-X8D1-M1TGJ 0.3M
OMRON E2EZ-X8D1-M1TGJ 0.3M Manual And Instructions
E2EZ-X8D1-M1TGJ 0.3M datasheetPDF datasheet
OMRON E2EZ-X8D1-M1TGJ 0.3M Product information and technical parameters：
Brand: OMRON
Name: Chip-immune Inductive Proximity Sensor
Model: E2EZ-X8D1-M1TGJ 0.3M
Appearance: Shielded, M30.
Sensing distance: 8 mm.
Output configuration: DC 2-wire, (1)-(4) pin arrangement.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available.
...More relevant models >>>>
E2EZ-X8D1-M1TGJ 0.3M datasheetPDF datasheet
OMRON E2EZ-X8D1-M1TGJ 0.3M Product information and technical parameters：
Brand: OMRON
Name: Chip-immune Inductive Proximity Sensor
Model: E2EZ-X8D1-M1TGJ 0.3M
Appearance: Shielded, M30.
Sensing distance: 8 mm.
Output configuration: DC 2-wire, (1)-(4) pin arrangement.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available.
Appearance: Shielded, M12.
Sensing distance: 4 mm.
Output: NPN.
Model: Operation mode NO.
Aluminum and Iron Both.
Detectable from Long Distances. Appearance: Unshielded, M18.
Sensing distance: 14 mm.
Model: Operation mode, NC.
Proximity Sensor with a Long Screw Length.
Increased tightening strength OMRON E2EZ-X8D1-M1TGJ 0.3M. Cable protectors,
provided as a standard feature.
Increased indicator visibility E2EZ-X8D1-M1TGJ 0.3M
A milled section for wrench grip on all models. Appearance: Unshielded.
Sensing surface: Front.
Sensing distance: 1.6 mm.
Model: Operation mode, NC.
Advanced Performance and Wide.
Range of Selections in a Super.
compact Size.
Only 5.5 × 5.5 mm with a built-in Amplifier.
Maximum sensing distance: 2 OMRON E2EZ-X8D1-M1TGJ 0.3M. 5 mm. Stable detection even with,
workpiece fluctuations.
Response frequency: 1 kHz.
Low current consumption. Power supply voltage: DC.
Sensing method: Retro-reflective without MSR function.
Sensing distance: 7 m[100 mm](When using E39-R1).
Output configu ration: NPN.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models) OMRON E2EZ-X8D1-M1TGJ 0.3M.
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. Sensing method: Through beam.
Connection method (cable length): Pre-wired connector (0.3 m).
Sensing distance: 300 mm.
Beams: Gap, 25 mm; Qty, 3.
Sensingwidth: 50 mm.
Output type: PNP open collector.
Compact Boddy, High-visibility E2EZ-X8D1-M1TGJ 0.3M.
Indicators, and Ideal for Picking.
Systems for Small Parts.
A variety of part sizes can be handled: F3W-D sensing,
width: 100 mm, F3W-E sensing width: 50 mm.
Low-profile Sensor with thickness of 8 mm annd enlargeable,
work opening E2EZ-X8D1-M1TGJ 0.3M.
Models with connectors are also available.
Support for XS5 Smartclick Connectors reduces work and,
simplifies wiring.
Sensing distance: 4 mm.
Output: NPN.
Model: Operation mode NO.
Aluminum and Iron Both.
Detectable from Long Distances. Appearance: Unshielded, M18.
Sensing distance: 14 mm.
Model: Operation mode, NC.
Proximity Sensor with a Long Screw Length.
Increased tightening strength OMRON E2EZ-X8D1-M1TGJ 0.3M. Cable protectors,
provided as a standard feature.
Increased indicator visibility E2EZ-X8D1-M1TGJ 0.3M
A milled section for wrench grip on all models. Appearance: Unshielded.
Sensing surface: Front.
Sensing distance: 1.6 mm.
Model: Operation mode, NC.
Advanced Performance and Wide.
Range of Selections in a Super.
compact Size.
Only 5.5 × 5.5 mm with a built-in Amplifier.
Maximum sensing distance: 2 OMRON E2EZ-X8D1-M1TGJ 0.3M. 5 mm. Stable detection even with,
workpiece fluctuations.
Response frequency: 1 kHz.
Low current consumption. Power supply voltage: DC.
Sensing method: Retro-reflective without MSR function.
Sensing distance: 7 m[100 mm](When using E39-R1).
Output configu ration: NPN.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models) OMRON E2EZ-X8D1-M1TGJ 0.3M.
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. Sensing method: Through beam.
Connection method (cable length): Pre-wired connector (0.3 m).
Sensing distance: 300 mm.
Beams: Gap, 25 mm; Qty, 3.
Sensingwidth: 50 mm.
Output type: PNP open collector.
Compact Boddy, High-visibility E2EZ-X8D1-M1TGJ 0.3M.
Indicators, and Ideal for Picking.
Systems for Small Parts.
A variety of part sizes can be handled: F3W-D sensing,
width: 100 mm, F3W-E sensing width: 50 mm.
Low-profile Sensor with thickness of 8 mm annd enlargeable,
work opening E2EZ-X8D1-M1TGJ 0.3M.
Models with connectors are also available.
Support for XS5 Smartclick Connectors reduces work and,
simplifies wiring.
...More relevant models >>>>