LK Automation Limited
Brand:
OMRON
E2S-Q11 1M | OMRON Ultra small square proximity switch E2S-Q11 1M
OMRON E2S-Q11 1M Manual And Instructions
E2S-Q11 1M datasheetPDF datasheet
OMRON E2S-Q11 1M Product information and technical parameters：
Brand: OMRON
Name: Ultra small square proximity switch
Model: E2S-Q11 1M
The ultra small size, high performance and rich models.
5.5mm ultra small built-in amplifier.
Maximum detection distance 2.5mm. Workpiece shaking can also be stable detection.
Response frequency 1kHz.
Low consumption current.
Category: DC 2 wire type.
Shape: non shield.
Detection surface: below.
Detection range: 1.6mm.
Action mode: NO.
...More relevant models >>>>
E2S-Q11 1M datasheetPDF datasheet
OMRON E2S-Q11 1M Product information and technical parameters：
Brand: OMRON
Name: Ultra small square proximity switch
Model: E2S-Q11 1M
The ultra small size, high performance and rich models.
5.5mm ultra small built-in amplifier.
Maximum detection distance 2.5mm. Workpiece shaking can also be stable detection.
Response frequency 1kHz.
Low consumption current.
Category: DC 2 wire type.
Shape: non shield.
Detection surface: below.
Detection range: 1.6mm.
Action mode: NO.
Appearance: Unshielded, M18.
Sensing distance: 8 mm.
Output configuration: DC 3-wire, PNP.
Model: Operation mode, NO.
General-purpose Threaded.
Capacitive Sensor.
Product lineup with M12, M18, and M30 models.
Fixed sensing distance requires no sensitivity adjustment. Size: M8, Shielded.
Sensing distance: 2 OMRON E2S-Q11 1M. 0 mm.
Connection: Pre-wired.
Body material: Stainless steel.
Thread length (overall length): 49 (62) E2S-Q11 1M
Output configuration: NPN.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels) OMRON E2S-Q11 1M.
Modular construction simplifies customization. Fitting materials: Iron, zinc plating.
Count: 1.
Accessories: Description, Slotted/Phillips screws, M3 × 12(with spring washers);
Material, Iron, zinc plating; Count, 2 .
Applicable sensor (mounting pitch on sensor side): E3C-S50 (8).
Page: Dimensions, 5.
Sensor type: Diffuse-reflective OMRON E2S-Q11 1M.
Sensing distance: 1 m.
Connection method: pre-wired.
Model: NPN output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications.
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing. Measuring range: 7±0.3mm.
Spot diameter: 18µm dia.
Static resolution: 0.25µm.
To achieve a compact Sensor Head and high-resolution measurements,
the ZW Series uses a white light confocaal principle to detect objects E2S-Q11 1M.
This principle is described below. Power supply voltage: 12 to 24 VDC.
Output configuration: Open-collector output (NPN output).
Output phases: Phases A .
Resolution (pulses/rotation): 10, 20, 60, 100, 200, 300, 360, 500 E2S-Q11 1M.
Compact Encoder with External.
Diameter of 25 mm.
Incremental model.
External diameter of 25 mm.
Resolution of up to 500 ppr.
Sensing distance: 8 mm.
Output configuration: DC 3-wire, PNP.
Model: Operation mode, NO.
General-purpose Threaded.
Capacitive Sensor.
Product lineup with M12, M18, and M30 models.
Fixed sensing distance requires no sensitivity adjustment. Size: M8, Shielded.
Sensing distance: 2 OMRON E2S-Q11 1M. 0 mm.
Connection: Pre-wired.
Body material: Stainless steel.
Thread length (overall length): 49 (62) E2S-Q11 1M
Output configuration: NPN.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels) OMRON E2S-Q11 1M.
Modular construction simplifies customization. Fitting materials: Iron, zinc plating.
Count: 1.
Accessories: Description, Slotted/Phillips screws, M3 × 12(with spring washers);
Material, Iron, zinc plating; Count, 2 .
Applicable sensor (mounting pitch on sensor side): E3C-S50 (8).
Page: Dimensions, 5.
Sensor type: Diffuse-reflective OMRON E2S-Q11 1M.
Sensing distance: 1 m.
Connection method: pre-wired.
Model: NPN output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications.
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing. Measuring range: 7±0.3mm.
Spot diameter: 18µm dia.
Static resolution: 0.25µm.
To achieve a compact Sensor Head and high-resolution measurements,
the ZW Series uses a white light confocaal principle to detect objects E2S-Q11 1M.
This principle is described below. Power supply voltage: 12 to 24 VDC.
Output configuration: Open-collector output (NPN output).
Output phases: Phases A .
Resolution (pulses/rotation): 10, 20, 60, 100, 200, 300, 360, 500 E2S-Q11 1M.
Compact Encoder with External.
Diameter of 25 mm.
Incremental model.
External diameter of 25 mm.
Resolution of up to 500 ppr.
...More relevant models >>>>