LK Automation Limited
Brand:
OMRON
E32-D11 | OMRON Optical fiber sensor E32-D11
OMRON E32-D11 Manual And Instructions
E32-D11 datasheetPDF datasheet
OMRON E32-D11 Product information and technical parameters：
Brand: OMRON
Name: Optical fiber sensor
Model: E32-D11
E32-D11 type: standard type; resistance to twists and turns,
Specialty: M6 screw,
Bending radius (mm): B; R4.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needs
...More relevant models >>>>
E32-D11 datasheetPDF datasheet
OMRON E32-D11 Product information and technical parameters：
Brand: OMRON
Name: Optical fiber sensor
Model: E32-D11
E32-D11 type: standard type; resistance to twists and turns,
Specialty: M6 screw,
Bending radius (mm): B; R4.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needs
Appearance: Shielded, M12.
Sensing distance: 2 mm.
Output configuration: DC 2-wire, (3)-(4) pin arrangement.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available OMRON E32-D11. Size: 8 dia.
Type: Standard type E32-D11
Sensing distance: 10 mm.
Resolution (See note.): 0.4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Size: M12 (Brass); Double; Unshielded.
Sensing distance: 16 mm.
Connecting method (See note 1.): M12 Connector.
Body length: Long OMRON E32-D11.
Output configuration: PNP.
Operation mode NO.
A new generation in global applications. E32-A09H type: special beam type; liquid level detection,
Specialty: heat resistant 150 C 3,
Bending radius (mm): R35.
Fiber element for meeting diversified needsSize: M18 (brass), single distance, shielding type.
Detection range: 5mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: long thread type OMRON E32-D11.
Output type: PNP.
Action mode NC.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
The oil spray test was carried out on the condition of the work site.
Simulation test was carried out in the environment of high oil mist concentration. Measurement range: 5 mm.
Output specifications: B7A serial communications output (See note 2.).
Actuator: Pin type.
Resolution: 1 µm.
Contact Displacement Sensor with Built-in.
Amplifier That Enables In-line Measurement.
of a Wide Range of Objects with a Low.
Operating Force.
Works with a low operating force (0.29 N) to deteect a wide vari,
ety of objects including glass, plastic, and rubber objects E32-D11.
Models with digital output for B7A Units and models with 4- to,
20-mA linear output corresponding to the 0- to 5-mm measure,
ment range are available.
Models with ball-, flat-, or pin-type actuators are available for a,
wide variety of objects E32-D11.
The XS3 Sensor I/O Connector makes Sensor connections simple.
Sensing distance: 2 mm.
Output configuration: DC 2-wire, (3)-(4) pin arrangement.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available OMRON E32-D11. Size: 8 dia.
Type: Standard type E32-D11
Sensing distance: 10 mm.
Resolution (See note.): 0.4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Size: M12 (Brass); Double; Unshielded.
Sensing distance: 16 mm.
Connecting method (See note 1.): M12 Connector.
Body length: Long OMRON E32-D11.
Output configuration: PNP.
Operation mode NO.
A new generation in global applications. E32-A09H type: special beam type; liquid level detection,
Specialty: heat resistant 150 C 3,
Bending radius (mm): R35.
Fiber element for meeting diversified needsSize: M18 (brass), single distance, shielding type.
Detection range: 5mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: long thread type OMRON E32-D11.
Output type: PNP.
Action mode NC.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
The oil spray test was carried out on the condition of the work site.
Simulation test was carried out in the environment of high oil mist concentration. Measurement range: 5 mm.
Output specifications: B7A serial communications output (See note 2.).
Actuator: Pin type.
Resolution: 1 µm.
Contact Displacement Sensor with Built-in.
Amplifier That Enables In-line Measurement.
of a Wide Range of Objects with a Low.
Operating Force.
Works with a low operating force (0.29 N) to deteect a wide vari,
ety of objects including glass, plastic, and rubber objects E32-D11.
Models with digital output for B7A Units and models with 4- to,
20-mA linear output corresponding to the 0- to 5-mm measure,
ment range are available.
Models with ball-, flat-, or pin-type actuators are available for a,
wide variety of objects E32-D11.
The XS3 Sensor I/O Connector makes Sensor connections simple.
...More relevant models >>>>