LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
E32-L66 | OMRON Optical fiber sensor E32-L66
OMRON E32-L66 Manual And Instructions
E32-L66 datasheetPDF datasheet

OMRON E32-L66 Product information and technical parameters:
Brand: OMRON
Name: Optical fiber sensor
Model: E32-L66
E32-L66 type: special beam type; liquid level detection,
Specialty: heat resistant 300 C 4, 6,
Bending radius (mm): R25.
Fiber element for meeting diversified needs

Appearance: Shielded, M12.
Sensing distance: 2 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models. High performance price ratio standard type proximity sensor OMRON E32-L66.
Standard cable protector.
The new DC two-wire type E32-L66
Non polar proximity sensor.
Type: DC three wire / connector type.
Shape: non shield, M12.
Detection range: 5mm.
Output configuration: NPN.
Action mode: NC. Sensing method: Through-beam (Emitter + Receiver).
Appearance: Horizontal.
Connection method: Pre-wired Connector (M12).
Sensing distance: 30m OMRON E32-L66.
Water- and Oil-resistant.
Photoelectric Sensor with.
Metal Housing Used for Long.
range Sensing.
Excellent resistance against the water and oil.
Easy application in locations with oil mist.
Long-range sensing up to 30 m with Through-beam models.
Shock resistance rated at 1,000m/s2.
Product lineup includes metal M12 pre-wired connector models.
NPN/PNP selector switch output. Appearance: T-shaped, slot center 7 mm OMRON E32-L66.
Sensing method: Throughbeam type(with slot).
Connecting method: Connector(4 poles).
Sensing distance: 5 mm (slot width).
Output configuration: Light-ON.
Indicator mode: Incident light.
Model: NPN output.
Global Standard Slot-type.
photomicrosensors with 50- to,
100-mA direct switching capacity.
Series includes models that enable switching between,
dark-ON and light-ON operation.
Response frequency as high as 1 kHz.
Easy operation monitoring with bright light indicator.
Wide operating voltage range: 5 to 24 VDC.
Models in which the light indicator turns ON for dark-ON,
operation are also available.
A wide range of variations in eight different shapes.
Flexible robot cable is provided as a standard feature. Power supply voltage: AC/DC power supply selectable type.
Sensing method: Through-beam (Emitter + Receiver).
Sensing distance: 40 m.
Output configu ration: Relay.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Difffuse-reflective: 2 E32-L66. 5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectaable power supply input (24 to 240 VDC, 24 to 240 VAC) E32-L66.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.


...More relevant models >>>>
Last one: OMRON E32-A07E2
next one: OMRON E32-A09