LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
E39-L143 | OMRON Mounting Brackets E39-L143
OMRON E39-L143 Manual And Instructions
E39-L143 datasheetPDF datasheet

OMRON E39-L143 Product information and technical parameters:
Brand: OMRON
Name: Mounting Brackets
Model: E39-L143
Fitting materials: Stainless steel (SUS304).
Count: 1 .
Accessories: Description, None;
Material, --;
Count, -- .
Applicable sensor (mounting pitch on sensor side): E3X-DA-S/MDA,
E3X-NA, E3C-LDA, E2C-EDA, E4C-UDA.
Page: Dimensions, 13.

Appearance: 4 dia.
Sensing distance: 3 mm.
Connecting method: M8 Pre-wired Connector Models (0.3 m).
Cable specifications: PVC (oil-resistant).
Operation mode: NC.
Wire color /pin arrangement: 1: +V, 3: 0 V, 4: Control output.
Model: NPN output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5 OMRON E39-L143. 4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available E39-L143
High-speed response frequency stably detects moving,
objects: 5 kHz max.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube against wire,
breakage is available (M4, M5 only) OMRON E39-L143.
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables. Pressure range: Negative pressure; 0 to -101 kPa.
ON/OFF output: Open collector (two independent outputs).
Linear output: 1 to 5 V.
Model: PNP output.
Pressure Sensor with.
Easy-to-Read LED Display.
Pressure status can be checked at a glance from the,
digital display and bar display OMRON E39-L143.
Measurement pressure prevents incorrect outputs due,
to momentary pressure changes.
Perform automatic teaching simply by teaching pressure,
values for good and bad products.
Industry’s smallest models at just 28 × 28 × 29 mm.
Only in hysteresis mode. Easy-to-use Windows®-based software that can provide,
more sophisticated functionality and capability to the,
F150-3 using a drag-and-drop, flow-chart like setup envi,
ronment requiring no programming skills. Ultra small rotary encoder (diameter 20) - absolute.
Machine built in super small.
The diameter of 20mm size, resolution 256 (8bit).
Axle and hollow shaft type. Sensing method: Narrow-beam reflective.
Connection method: Connector (M8, 4pins).
Sensing distance: 90±30 mm.
Model: NPN outputt E39-L143.
Small 2.5-mm-diameter Spot Ideal for.
Detecting Small Workpieces.
Tiny workpieces as little as 0.1 mm in diameter can be,
detected with the 2.5-mm-dia. spot.
The narrow beam enables sensing from small slots or holes.
The small spott of light enables visual checking of sensing,
spot position E39-L143.
IP67 degree of protection, mutual interference prevention,
and EN standard compliance.


...More relevant models >>>>
Last one: OMRON E39-L142
next one: OMRON E39-L144