LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
E3JK-TR13-C 2M | OMRON Built-in Power Supply Photoelectric Sensor E3JK-TR13-C 2M
OMRON E3JK-TR13-C 2M Manual And Instructions
E3JK-TR13-C 2M datasheetPDF datasheet

OMRON E3JK-TR13-C 2M Product information and technical parameters:
Brand: OMRON
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-TR13-C 2M
Power supply voltage: AC/DC power supply selectable type.
Sensing method: Through-beam (Emitter + Receiver).
Sensing distance: 40 m.
Output configu ration: Relay.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.

High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / connector type.
Shape: shield, M30.
Detection range: 10mm.
Output configuration: NPN.
Action mode: NO. Appearance: 4 dia.
Sensing distance: 3 mm OMRON E3JK-TR13-C 2M.
Connecting method: M8 Pre-wired Connector Models (0.3 m).
Cable specifications: PVC (oil-resistant) E3JK-TR13-C 2M
Operation mode: NC.
Wire color /pin arrangement: 1: +V, 3: 0 V, 4: Control output.
Model: PNP output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available OMRON E3JK-TR13-C 2M.
High-speed response frequency stably detects moving,
objects: 5 kHz max.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube against wire,
breakage is available (M4, M5 only).
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables OMRON E3JK-TR13-C 2M. Appearance: Standard.
Sensing method: Through beam type (with slot).
Connecting method: Connector model (4 poles).
Sensing distance: 5 mm (slot width).
Operating mode: Dark-ON/Light-ON (2 outputs).
Indicator mode: Incident light.
Model: NPN output.
Built-in connector enables,
downsizing and easier connection.
Protective circuit for safe operation.
A built-in connector minimizes the shape and dimensional,
requirements.
Two outputs: light-ON and dark-ON.
Complete lineup including seven different shapes.
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator can be seen from manny directions to enable,
installation in more locations E3JK-TR13-C 2M.
Connector with lock that mates with commercially available,
connectors. High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two--wire type E3JK-TR13-C 2M.
Non polar proximity sensor.
Type: DC two-wire / connector type.
Polarity: none.
Shape: shield, M30.
Detection range: 10mm.
Action mode: NO.


...More relevant models >>>>