LK Automation Limited
Brand:
OMRON
E3JM-10M4 | OMRON AC and DC type photoelectric switch (power supply) E3JM-10M4
OMRON E3JM-10M4 Manual And Instructions
E3JM-10M4 datasheetPDF datasheet
OMRON E3JM-10M4 Product information and technical parameters：
Brand: OMRON
Name: AC and DC type photoelectric switch (power supply)
Model: E3JM-10M4
E3JM-10M4 detection methods: the firing pattern,
Connection: terminal plate,
Detection range: 10m.
Output status: ON into the light; light shading ON; switch conversion type.
Output: relay.
2 types of cost reduction
...More relevant models >>>>
E3JM-10M4 datasheetPDF datasheet
OMRON E3JM-10M4 Product information and technical parameters：
Brand: OMRON
Name: AC and DC type photoelectric switch (power supply)
Model: E3JM-10M4
E3JM-10M4 detection methods: the firing pattern,
Connection: terminal plate,
Detection range: 10m.
Output status: ON into the light; light shading ON; switch conversion type.
Output: relay.
2 types of cost reduction
Sensing method: Through-beam.
Connection method: Pre-wired (2 m).
Sensing distance: 25 mm.
No. of opti- cal axes: 2.
Model: PNP output.
Photoelectric Sensor with Grooved.
Design and Easy Settings .
Groove-type Sensor with groove width of 25 mm.
Models are available with one or two light axes OMRON E3JM-10M4.
Models are available with M8 pre-wired connectors. High performance price ratio standard type proximity sensor E3JM-10M4
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / connector type.
Shape: shield, M18.
Detection range: 5mm.
Output configuration: PNP.
Action mode: NC. Optical system: Through-beam.
Measuring width: 1-mm dia.
Sensing distance: 0 to 2000 mm OMRON E3JM-10M4.
Resolution: 4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Model: Shielded, M18.
Sensing distance: 5 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NO.
Proximity Sensor with Resin Case,
with Superb Water Resistance.
IP68 protection.
Mutual interference prevention with models with different,
frequencies is also available OMRON E3JM-10M4. Detection methods: the firing pattern.
Detection range: 200mm.
Usage: slender type,
Small thin space probe;
Interference prevention function with close installationOptical system: Regular reflective; Diffuse reflective.
Measurement range: Height direction, 22.3±0.5 mm, 10.6±0.4 mm;
Width direction, 3 mm (typical).
Resolution: Height direction, 0.25 μm;
Width direction, 5 μm (3mm/631pixels).
ZG2 debut!
Achieving stable measurement.
through innovative technology. Appearance: 6.5 dia.
Sensing distance: 4 mm.
Connecting method: M8 Pre-wired Connector Models (0.3 m).
Cable specifications: PVC (oil-resistant).
Operation mode: NC.
Wire color /pin arrangement: 1: +V, 3: 0 V, 4: Control output.
Model: NPN output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available.
High-speedd response frequency stably detects moving,
objects: 5 kHz max E3JM-10M4.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube againstt wire,
breakage is available (M4, M5 only) E3JM-10M4.
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables.
Connection method: Pre-wired (2 m).
Sensing distance: 25 mm.
No. of opti- cal axes: 2.
Model: PNP output.
Photoelectric Sensor with Grooved.
Design and Easy Settings .
Groove-type Sensor with groove width of 25 mm.
Models are available with one or two light axes OMRON E3JM-10M4.
Models are available with M8 pre-wired connectors. High performance price ratio standard type proximity sensor E3JM-10M4
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / connector type.
Shape: shield, M18.
Detection range: 5mm.
Output configuration: PNP.
Action mode: NC. Optical system: Through-beam.
Measuring width: 1-mm dia.
Sensing distance: 0 to 2000 mm OMRON E3JM-10M4.
Resolution: 4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Model: Shielded, M18.
Sensing distance: 5 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NO.
Proximity Sensor with Resin Case,
with Superb Water Resistance.
IP68 protection.
Mutual interference prevention with models with different,
frequencies is also available OMRON E3JM-10M4. Detection methods: the firing pattern.
Detection range: 200mm.
Usage: slender type,
Small thin space probe;
Interference prevention function with close installationOptical system: Regular reflective; Diffuse reflective.
Measurement range: Height direction, 22.3±0.5 mm, 10.6±0.4 mm;
Width direction, 3 mm (typical).
Resolution: Height direction, 0.25 μm;
Width direction, 5 μm (3mm/631pixels).
ZG2 debut!
Achieving stable measurement.
through innovative technology. Appearance: 6.5 dia.
Sensing distance: 4 mm.
Connecting method: M8 Pre-wired Connector Models (0.3 m).
Cable specifications: PVC (oil-resistant).
Operation mode: NC.
Wire color /pin arrangement: 1: +V, 3: 0 V, 4: Control output.
Model: NPN output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available.
High-speedd response frequency stably detects moving,
objects: 5 kHz max E3JM-10M4.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube againstt wire,
breakage is available (M4, M5 only) E3JM-10M4.
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables.
...More relevant models >>>>