LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
E3S-A Series | OMRON Built-in Amplifier Photoelectric Sensor E3S-A Series
OMRON E3S-A Series Manual And Instructions
E3S-A Series datasheetPDF datasheet

OMRON E3S-A Series Product information and technical parameters:
Brand: OMRON
Name: Built-in Amplifier Photoelectric Sensor
Model: E3S-A Series
Ordering Information.
Built-in Amplifier Photoelectric Sensors.

Sensing method: Through-beam type (with slot).
Sensing distance: 3.6 mm (slot width).
Output type: NPN output.
Output configuration: Dark-ON.
Photomicrosensor with light,
modulation for reduced external,
light interference and a,
connector for easy maintenance.
Built-in connectors.
Select from four easy-to-use shapes for efficient space,
utilization OMRON E3S-A Series.
Connectors with locks for safety against vibration E3S-A Series
Convenient mounting method using M3 screws.
Wide operating voltage range: 5 to 24 VDC. Appearance: Shielded, M18.
Sensing distance: 7 mm.
Output configuration: DC 2-wire.
Operation mode: NO.
Spatter-resistant Fluororesin,
coated Proximity Sensor.
Superior spatter resistance OMRON E3S-A Series.
Long Sensing-distance Models added for sensing,
distances up to 15 mm.
Pre-wired Smartclick Connector Models are also available. Appearance: Shielded, M12.
Sensing distance: 3 mm.
Model: Operation mode, NC.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models OMRON E3S-A Series. Type: Shielded.
Appearance: Flat, 30 × 14 × 4.8 mm.
Sensing distance: 5 mm.
Repeat accuracy: 2 μm.
Cable specification: Standard .
Proximity Sensor with Separate.
Amplifier Enables Easily Making High.
precision Sensitivity Settings.
Wide variety of Sensor Heads to select according to the,
application. Flexible cables are used between Preamplifiers,
and Amplifier Units of the Sensor Heads.
High resistance to changes in ambient temperature.
Temperature characteristics of 0.08%/°C (for 5.4-ddia E3S-A Series. models).
Make simple and reliable detection settings with micron,
level precision using the teaching function.
Check the sensing excess gain level on the digital display.
Support for high-precision positioning and screening witth,
fine positioning to maximize variations E3S-A Series.
The E2C-EDA0 supports an EtherCAT Sensor,
Communications Unit or CompoNet Sensor,
Communications Unit.


...More relevant models >>>>
Last one: OMRON E3S-GS3E4
next one: OMRON E3S-AT11