LK Automation Limited
Brand:
OMRON
E3S-AT36 | OMRON Built-in Amplifier Photoelectric Sensor E3S-AT36
OMRON E3S-AT36 Manual And Instructions
E3S-AT36 datasheetPDF datasheet
E3S-AT36 INSTRUCTION sheet
OMRON E3S-AT36 Product information and technical parameters：
Brand: OMRON
Name: Built-in Amplifier Photoelectric Sensor
Model: E3S-AT36
Sensing method: Through-beam Sensors.
Appearance: Horizontal.
Connection method: Connector(M12).
Sensing distance: 7 m.
Functions: --.
Model: PNP output.
Ordering Information.
Built-in Amplifier Photoelectric Sensors.
...More relevant models >>>>
E3S-AT36 datasheetPDF datasheet
E3S-AT36 INSTRUCTION sheet
OMRON E3S-AT36 Product information and technical parameters：
Brand: OMRON
Name: Built-in Amplifier Photoelectric Sensor
Model: E3S-AT36
Sensing method: Through-beam Sensors.
Appearance: Horizontal.
Connection method: Connector(M12).
Sensing distance: 7 m.
Functions: --.
Model: PNP output.
Ordering Information.
Built-in Amplifier Photoelectric Sensors.
High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC / wire type.
Polarity: there.
Shape: non shield, M30.
Detection distance: 20mm.
Action mode: NO. Field of view: Wide View (Long-distance).
Number of pixels: 760,000 pixels OMRON E3S-AT36.
Color: PNP.
Field of view/Installation distance: Refer to figure 7 on p E3S-AT3620.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller.
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series OMRON E3S-AT36. E32-T21 type: standard type; resistance to twists and turns,
Specialty: M3 screws (small),
Shape / detection distance (mm): 240; 200; 110 (45),
Bending radius (mm): B; R4.
Standard test object (minimum test object) (mm) 1: 0.5 (0.005),
Fiber element for meeting diversified needsSize: M18, Shielded.
Sensing distance: 8.0 mm.
Connection: Pre-wired OMRON E3S-AT36.
Body material: Brass.
Thread length (overall length): 39 (59).
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. E32-D21L type: special beam type; long range / high function,
Specialty: M4 screw,
Bending radius (mm): R10.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsAppearance: Shielded, M18.
Sensing distance: 5 mm.
Output: PNP.
Model: Operation mode NO.
Aluminum and Iron Both.
Detectable from Long Distances. Advanced Fiber Amplifier Units.
Features a Power Tuning function that optimiizes light,
reception at the press of a button E3S-AT36.
APC circuits to suppress LED aging degradation used with,
4-element LEDs.
2-channel models achieve the thinnest* profile in the industry,
at only 5 mm per channel.
2-channel models also offer AND/OR control output E3S-AT36.
The E3X-MDA0 with two channels supports an EtherCAT Sensor.
Communications Unit or CompoNet Sensor Communications Unit.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC / wire type.
Polarity: there.
Shape: non shield, M30.
Detection distance: 20mm.
Action mode: NO. Field of view: Wide View (Long-distance).
Number of pixels: 760,000 pixels OMRON E3S-AT36.
Color: PNP.
Field of view/Installation distance: Refer to figure 7 on p E3S-AT3620.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller.
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series OMRON E3S-AT36. E32-T21 type: standard type; resistance to twists and turns,
Specialty: M3 screws (small),
Shape / detection distance (mm): 240; 200; 110 (45),
Bending radius (mm): B; R4.
Standard test object (minimum test object) (mm) 1: 0.5 (0.005),
Fiber element for meeting diversified needsSize: M18, Shielded.
Sensing distance: 8.0 mm.
Connection: Pre-wired OMRON E3S-AT36.
Body material: Brass.
Thread length (overall length): 39 (59).
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. E32-D21L type: special beam type; long range / high function,
Specialty: M4 screw,
Bending radius (mm): R10.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsAppearance: Shielded, M18.
Sensing distance: 5 mm.
Output: PNP.
Model: Operation mode NO.
Aluminum and Iron Both.
Detectable from Long Distances. Advanced Fiber Amplifier Units.
Features a Power Tuning function that optimiizes light,
reception at the press of a button E3S-AT36.
APC circuits to suppress LED aging degradation used with,
4-element LEDs.
2-channel models achieve the thinnest* profile in the industry,
at only 5 mm per channel.
2-channel models also offer AND/OR control output E3S-AT36.
The E3X-MDA0 with two channels supports an EtherCAT Sensor.
Communications Unit or CompoNet Sensor Communications Unit.
...More relevant models >>>>