LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
E3S-VS5B42R | OMRON Small Spot/Mark Sensor with Built-in Amplifier E3S-VS5B42R
OMRON E3S-VS5B42R Manual And Instructions
E3S-VS5B42R datasheetPDF datasheet

OMRON E3S-VS5B42R Product information and technical parameters:
Brand: OMRON
Name: Small Spot/Mark Sensor with Built-in Amplifier
Model: E3S-VS5B42R
Sensing method: Diffuse reflective.
Appearance: Vertical.
Connection method: Pre-wired .
Sensing distance: 30 to 50 mm.
Model: PNP Open collector output type .
Both Red-light Models and Green,
light Models to Detect a Wide Variety,
of Colors.

Detection mode: diffuse reflection type.
Connection mode: lead type (2 m)
Detection distance: infrared 100mm.
Output mode: PNP output. Appearance: 3 dia.
Sensing distance: 2 mm.
Connecting method: M8 Pre-wired Connector Models (0.3 m).
Cable specifications: PVC (oil-resistant).
Operation mode: NC OMRON E3S-VS5B42R.
Wire color /pin arrangement: 1: +V, 3: 0 V, 4: Control output.
Model: PNP output E3S-VS5B42R
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available.
High-speed response frequency stably detects moving,
objects: 5 kHz max.
Four indicator lamps for easier indicator positioning OMRON E3S-VS5B42R.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube against wire,
breakage is available (M4, M5 only).
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables. Size: M8(Stainless steel)(See note 2.); Single; Shielded.
Sensing distance: 1.5 mm.
Connecting method (See note 1 OMRON E3S-VS5B42R. ): M8 Connector (3-pin).
Body length: Short.
Output configuration: PNP.
Operation mode NO.
A new generation in global applications. Continuation of the E6B2 high cost, value also have more choice.
E6B3, E6C4 blockbuster debut! Complementary output of the first starting high anti interference.
40mm diameter, shaft diameter of phi 8mm universal, with strong axial load capacity.
50mm diameter, shaft diameter of phi 10mm rugged, with strong axial load capacity,
At the same time, the use of IP65 anti drip, anti oil structure.
E6B2 complementary output will be issued over the same period.
Connection length to reach a full 30m!
Resolution (pulsee / rotation):10~3600P/R E3S-VS5B42R.
Power supply voltage: DC12 ~ 24V
Consumption current: 100mA below.
Output state: complementary output.
Maximum response frequency: 100kHz.
Output phase difference: A phase, B phase difference 90 plus or minnus 45 E3S-VS5B42R.
Starting torque: M / 0.98mN below (at room temperature).
Maximum allowable speed: 6000r/min.
Axial force: radial...... 30N, axial...... 20N.


...More relevant models >>>>