LK Automation Limited
Brand:
OMRON
E3X-DA21F-S 2M | OMRON Digital Fiber Amplifier Unit E3X-DA21F-S 2M
OMRON E3X-DA21F-S 2M Product information and technical parameters：
Brand: OMRON
Name: Digital Fiber Amplifier Unit
Model: E3X-DA21F-S 2M
Type: High-speed response models.
Connecting method: Pre-wired (2 m).
Model: NPN output.
Applicable wire-saving connector(sold separately): Type,--; Model,--.
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years.
Power turning to easily set the optimum light level.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit.
Power supply voltage: 12 to 24 VDC.
Output configuration: NPN open-collector outputv.
Resolution (pulses/rotation): 1,000.
Rugged Rotary Encoder.
Incremental model.
External diameter of 60 mm.
Resolution of up to 1000 ppr.
IP65 oil-resistance with strong shaft.
Radial: 120 N, Thrust: 50 N. Sensing method: Convergent-reflective OMRON E3X-DA21F-S 2M.
Connection method: Pre-wired (2 m).
Sensing distance: 5 to 15 mm E3X-DA21F-S 2M
Operation mode: Dark-ON.
Model: NPN output.
Makes Mounting and Installation Simpler and Smoother.
Suitable for Applications in the Rechargeable Battery Industry. Sensing method: Through-beam (Emitter + Receiver).
Connection method: Pre-wired (2 m).
Sensing distance: 30 m.
Model: NPN output OMRON E3X-DA21F-S 2M.
The Standard for Photoelectric Sensors,
with a Secure Track Record of One,
Million Sold Yearly.
Long sensing distance of 30 m for Through-beam Models, 4 m for,
Retro-reflective Models, and 1 m for Diffuse-reflective Models.
Mechanical axis and optical axis offset of less than ±2.5° simplifies,
optical axis adjustment.
High stability with unique algorithm that prevents interference of,
external light OMRON E3X-DA21F-S 2M. E3Z-G62-S0SHW-E5 is selected for use with 1 optical axis and 14 axis type
Prevent mutual interference function, EN standard specifications
Groove type photoelectric sensor without optical axis adjustmentE32-TC200F4 type: standard type; standard,
Specialty: M3 screw (small) with casing,
Shape / detection distance (mm): 270; 220; 125 (50),
Bending radius (mm): R10.
Standard test object (minimum test object) (mm) 1: 1 (0.0005),
Fiber element for meeting diversified needsAppearance: Shielded, M30.
Sensing distance: 10 mm.
Output configuration : DC 2-wire.
Operation mode: NO.
Inductive Profoximity Sensor with.
Chemical-resistant Fluororesin Case.
Housing and mounting are made of Fluororesin resistant to chhemicals E3X-DA21F-S 2M.
Maximum sensing distance: 10 mm. Appearance: Shielded, M12.
Sensing distance: 4 mm.
Model: Output configuration: NPN NC.
Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
wwith reduced problems due to workpiece collisions E3X-DA21F-S 2M.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature.
Output configuration: NPN open-collector outputv.
Resolution (pulses/rotation): 1,000.
Rugged Rotary Encoder.
Incremental model.
External diameter of 60 mm.
Resolution of up to 1000 ppr.
IP65 oil-resistance with strong shaft.
Radial: 120 N, Thrust: 50 N. Sensing method: Convergent-reflective OMRON E3X-DA21F-S 2M.
Connection method: Pre-wired (2 m).
Sensing distance: 5 to 15 mm E3X-DA21F-S 2M
Operation mode: Dark-ON.
Model: NPN output.
Makes Mounting and Installation Simpler and Smoother.
Suitable for Applications in the Rechargeable Battery Industry. Sensing method: Through-beam (Emitter + Receiver).
Connection method: Pre-wired (2 m).
Sensing distance: 30 m.
Model: NPN output OMRON E3X-DA21F-S 2M.
The Standard for Photoelectric Sensors,
with a Secure Track Record of One,
Million Sold Yearly.
Long sensing distance of 30 m for Through-beam Models, 4 m for,
Retro-reflective Models, and 1 m for Diffuse-reflective Models.
Mechanical axis and optical axis offset of less than ±2.5° simplifies,
optical axis adjustment.
High stability with unique algorithm that prevents interference of,
external light OMRON E3X-DA21F-S 2M. E3Z-G62-S0SHW-E5 is selected for use with 1 optical axis and 14 axis type
Prevent mutual interference function, EN standard specifications
Groove type photoelectric sensor without optical axis adjustmentE32-TC200F4 type: standard type; standard,
Specialty: M3 screw (small) with casing,
Shape / detection distance (mm): 270; 220; 125 (50),
Bending radius (mm): R10.
Standard test object (minimum test object) (mm) 1: 1 (0.0005),
Fiber element for meeting diversified needsAppearance: Shielded, M30.
Sensing distance: 10 mm.
Output configuration : DC 2-wire.
Operation mode: NO.
Inductive Profoximity Sensor with.
Chemical-resistant Fluororesin Case.
Housing and mounting are made of Fluororesin resistant to chhemicals E3X-DA21F-S 2M.
Maximum sensing distance: 10 mm. Appearance: Shielded, M12.
Sensing distance: 4 mm.
Model: Output configuration: NPN NC.
Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
wwith reduced problems due to workpiece collisions E3X-DA21F-S 2M.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature.
...More relevant models >>>>