LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
E3X-NA6 | OMRON Simple Fiber Amplifier Unit E3X-NA6
OMRON E3X-NA6 Manual And Instructions
E3X-NA6 datasheetPDF datasheet
E3X-NA6 datasheetPDF datasheet
E3X-NA6 datasheetPDF datasheet
E3X-NA6 INSTRUCTION sheet

OMRON E3X-NA6 Product information and technical parameters:
Brand: OMRON
Name: Simple Fiber Amplifier Unit
Model: E3X-NA6
Item: Standard models.
Connection method: Wire-saving connector.
Ratings and Specifications: --.
Model: NPN output.
Simple and Affordable Fiber Amplifier Units.
Reasonable price.
Use the one-key one-function feature for quick,
easy operation.
GIGA RAY for the highest level of power in this class for,
stable detection even with sensing objects with low.
reflection or large sensing objects.

Appearance: T-shaped, slot center 10 mm.
Sensing method: T-shaped, slot center 7 mm.
Connecting method: Connector(4 poles).
Sensing distance: 5 mm (slot width).
Output configuration: Dark-ON/Light-ON (selectable).
Indicator mode: Incident light.
Model: NPN output.
Global Standard Slot-type.
photomicrosensors with 50- to,
100-mA direct switching capacity OMRON E3X-NA6.
Series includes models that enable switching between,
dark-ON and light-ON operation E3X-NA6
Response frequency as high as 1 kHz.
Easy operation monitoring with bright light indicator.
Wide operating voltage range: 5 to 24 VDC.
Models in which the light indicator turns ON for dark-ON,
operation are also available.
A wide range of variations in eight different shapes OMRON E3X-NA6.
Flexible robot cable is provided as a standard feature. Appearance: Shielded, M12.
Sensing distance: 2 mm.
Output configuration: DC 2-wire, (1)-(4) pin arrangement.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available OMRON E3X-NA6. E32-L16 type: special beam type; liquid level detection,
Specialty: the detection range of the detection location is scattered less than 0.2mm,
Bending radius (mm): R25.
Fiber element for meeting diversified needsConnection method: Pre-wired connector.
Cable length: 0.5 m.
Sensing distance: 50 ± 10 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurementss for any type of workpiece E3X-NA6.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire tyype E3X-NA6.
Non polar proximity sensor.
Type: DC three wire / wire type.
Shape: shield, M12.
Detection range: 2mm.
Output configuration: NPN.
Action mode: NC.


...More relevant models >>>>
Last one: OMRON E3X-NA41 2M
next one: OMRON E3X-NA8