LK Automation Limited
Brand:
OMRON
E3ZM-T68 | OMRON Compact Photoelectric Sensor E3ZM-T68
OMRON E3ZM-T68 Manual And Instructions
E3ZM-T68 datasheetPDF datasheet
E3ZM-T68 INSTRUCTION sheet
OMRON E3ZM-T68 Product information and technical parameters：
Brand: OMRON
Name: Compact Photoelectric Sensor
Model: E3ZM-T68
Sensing method: Through beam (Emitter + Receiver).
Connection method: Connector (M8, 4 pins).
Sensing distance: 0.8 m (apertures built in).
Model: NPN output .
Stainless Steel Housing Ideal for Food Industry PAT Pending.
Strong resistance against detergents, disinfectants, and jet liquid flow.
Product lineup includes BGS Reflective Models and Through-beam,
Models with built-in slits.
Certified by Ecolab Europe.
...More relevant models >>>>
E3ZM-T68 datasheetPDF datasheet
E3ZM-T68 INSTRUCTION sheet
OMRON E3ZM-T68 Product information and technical parameters：
Brand: OMRON
Name: Compact Photoelectric Sensor
Model: E3ZM-T68
Sensing method: Through beam (Emitter + Receiver).
Connection method: Connector (M8, 4 pins).
Sensing distance: 0.8 m (apertures built in).
Model: NPN output .
Stainless Steel Housing Ideal for Food Industry PAT Pending.
Strong resistance against detergents, disinfectants, and jet liquid flow.
Product lineup includes BGS Reflective Models and Through-beam,
Models with built-in slits.
Certified by Ecolab Europe.
Sensing method: Convergent-reflective.
Connection method: Pre-wired (2 m).
Sensing distance: 5 to 30 mm.
Operation mode: Dark-ON.
Model: PNP output.
Makes Mounting and Installation Simpler and Smoother.
Suitable for Applications in the Rechargeable Battery Industry. Sensing method: Reflective model(for mark detection) OMRON E3ZM-T68 .
Connection method: Pre-wired (2 m).
Sensing distance: 10±2 mm E3ZM-T68
Extremely thin beam ideal for detection of minute objects and marks.
Ideal for detection of small objects and slight color differences.
Bad mark detection.
Detection of thin wire of 200 μ.
Detection of slight level differences. Detection Distance of 100 mm for.
Both Ferrous and Non-ferrous.
Substances OMRON E3ZM-T68 .
Ultra long-distance detection of 100 mm for both ferrous and,
non-ferrous substances.
Models also available for use under water. Connector / connector fixed bracketSize: M12, Non-shielded.
Sensing distance: 8.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 56 (70).
Output configuration: NPN.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance OMRON E3ZM-T68 .
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Sensing method: Narrow-beam reflective.
Connection method: Connector (M8, 4pins).
Sensing distance: 90±30 mm.
Model: NPN output.
Small 2.5-mm-diameter Spot Ideal for.
Detecting Small Workpieces.
Tiny workpieces as little as 0.1 mm in diameter can be,
detected with the 2.5-mm-dia. spot.
The narrow beam enables sensing from small slots or holes.
The small spot oof light enables visual checking of sensing,
spot position E3ZM-T68 .
IP67 degree of protection, mutual interference prevention,
and EN standard compliance. Size: M8(Stainless steel)(See note 2.); Single; Shielded.
Sensing distance: 1.5 mm.
Connnecting method (See note 1 E3ZM-T68 . ): Pre-wired.
Body length: Long.
Output configuration: PNP.
Operation mode NC.
A new generation in global applications.
Connection method: Pre-wired (2 m).
Sensing distance: 5 to 30 mm.
Operation mode: Dark-ON.
Model: PNP output.
Makes Mounting and Installation Simpler and Smoother.
Suitable for Applications in the Rechargeable Battery Industry. Sensing method: Reflective model(for mark detection) OMRON E3ZM-T68 .
Connection method: Pre-wired (2 m).
Sensing distance: 10±2 mm E3ZM-T68
Extremely thin beam ideal for detection of minute objects and marks.
Ideal for detection of small objects and slight color differences.
Bad mark detection.
Detection of thin wire of 200 μ.
Detection of slight level differences. Detection Distance of 100 mm for.
Both Ferrous and Non-ferrous.
Substances OMRON E3ZM-T68 .
Ultra long-distance detection of 100 mm for both ferrous and,
non-ferrous substances.
Models also available for use under water. Connector / connector fixed bracketSize: M12, Non-shielded.
Sensing distance: 8.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 56 (70).
Output configuration: NPN.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance OMRON E3ZM-T68 .
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Sensing method: Narrow-beam reflective.
Connection method: Connector (M8, 4pins).
Sensing distance: 90±30 mm.
Model: NPN output.
Small 2.5-mm-diameter Spot Ideal for.
Detecting Small Workpieces.
Tiny workpieces as little as 0.1 mm in diameter can be,
detected with the 2.5-mm-dia. spot.
The narrow beam enables sensing from small slots or holes.
The small spot oof light enables visual checking of sensing,
spot position E3ZM-T68 .
IP67 degree of protection, mutual interference prevention,
and EN standard compliance. Size: M8(Stainless steel)(See note 2.); Single; Shielded.
Sensing distance: 1.5 mm.
Connnecting method (See note 1 E3ZM-T68 . ): Pre-wired.
Body length: Long.
Output configuration: PNP.
Operation mode NC.
A new generation in global applications.
...More relevant models >>>>