LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
E8F2-A01C | OMRON Digital Pressure Sensor E8F2-A01C
OMRON E8F2-A01C Manual And Instructions
E8F2-A01C datasheetPDF datasheet
E8F2-A01C INSTRUCTION sheet

OMRON E8F2-A01C Product information and technical parameters:
Brand: OMRON
Name: Digital Pressure Sensor
Model: E8F2-A01C
Pressure range: Positive pressure; 0 to 100 kPa.
ON/OFF output: Open collector (two independent outputs).
Linear output: 1 to 5 V.
Model: NPN output.
Pressure Sensor with.
Easy-to-Read LED Display.
Pressure status can be checked at a glance from the,
digital display and bar display.
Measurement pressure prevents incorrect outputs due,
to momentary pressure changes.
Perform automatic teaching simply by teaching pressure,
values for good and bad products.
Industry’s smallest models at just 28 × 28 × 29 mm.
Only in hysteresis mode.

Type: Standard models.
Connecting method: Pre-wired (2 m).
Model: PNP output.
Applicable wire-saving connector(sold separately): Type,--; Model,--.
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years OMRON E8F2-A01C.
Power turning to easily set the optimum light level E8F2-A01C
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit OMRON E8F2-A01C. Name: Set.
Easy-to-use, Simple Magnetic.
Proximity Sensor.
Permanent magnetic used to operate the reed switch.
Ideal for detecting opening and closing of doors. E32-L25 type: special light beam type; limited reflection,
Features: small difference; high side function,
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: (0 OMRON E8F2-A01C. 005),
Fiber element for meeting diversified needsSize: Shielded, M30.
Sensing distance: 10 mm.
Output: No polarity Pin allocations: 3-4.
Operation mode: NO.
Highly Durable Proximity Sensor for.
Tough Environments.
Completely stainless-steel housing.
Aluminum chip immunity.
Embedding installation to metal (steel) fittings.
Chemical resistance certified by Ecolab Europe.
Lineup includes pre-wire models and DC 3-wire NPN output,
models with fluororesin coating. E32-T22L type: special beam type; long range / high function,
Features: with 2 cylinder (small),
Shape / detection distance (mm): 540; 440; 250 (100),
Bending radius (mm): R10.
Standard test object (minimum test object) (mm) 1: 0.9 (0.005),
Fiberr element for meeting diversified needsAppearance: Shielded, M12 E8F2-A01C.
Sensing distance: 3 mm.
Output configuration: DC 2-wire (1)-(4) pin arrangement.
Operation mode: NO.
Spatter-resistant Fluororesin,
coated Proximity Sensor.
Superior sspatter resistance E8F2-A01C.
Long Sensing-distance Models added for sensing,
distances up to 15 mm.
Pre-wired Smartclick Connector Models are also available.


...More relevant models >>>>
Last one: OMRON E8F2 Series
next one: OMRON E8F2-B10C