LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
FZ4-H655-10 | OMRON Vision Sensor FZ4-H655-10
OMRON FZ4-H655-10 Manual And Instructions
FZ4-H655-10 datasheetPDF datasheet
FZ4-H655-10 User's Manual
FZ4-H655-10 REFERENCE MANUAL
FZ4-H655-10 User's Manual
FZ4-H655-10 SETUPINSTRUCTION MANUAL
FZ4-H655-10 INSTRUCTION sheet

OMRON FZ4-H655-10 Product information and technical parameters:
Brand: OMRON
Name: Vision Sensor
Model: FZ4-H655-10
Item: FZ4 Series Controllers; Standard Controllers.
Descriptions: Box-type controllers.
High-Grade Proc'' Items: o.
No.of cameras: 4.
Output: PNP.
Remarks: --.
Speed and accuracy determine the basic,
performance of sensing.Usability efficiently,
puts that performance to work.OMRON’s FZ,
Series of Vision Sensors represent an evolu,
tionary journey that takes these three aspects,
from the past and into the future to allow you,
to increase quality.

Appearance: Shielded, M30.
Sensing distance: 8 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available OMRON FZ4-H655-10. Size: M12 (Brass); Single; Shielded.
Sensing distance: 10 mm FZ4-H655-10
Connecting method (See note 1.): M12 Connector.
Body length: Short.
Output configuration: NPN.
Operation mode NC.
A new generation in global applications. Fitting materials: Stainless steel (SUS304).
Count: 1.
Accessories: Description, Holder (upper) Holder,
(lower) Pipe Bolts M4 × 12 with Hexagonal holes,
Bolts M4 × 30 with hexagonal holes,
Phillips screws M3 × 12 (with spring and plain washers),
Spring washer M4 Plain washer M4 Nuts M4;
Material, Heat-resistant ABS resin, 66 nylon,
Stainless steel (SUS304), Iron, nickel plating,
Iron, nickel plating, Stainless steel (SUS304),
Iron, nickel plating, Iron, nickel plating,
Iron, nickel plating; Count, 1, 1, 1, 2, 1, 2, 1, 1, 3 OMRON FZ4-H655-10.
Applicable sensor (mounting pitch on sensor side): E3Z (25 OMRON FZ4-H655-10. 4) E39-R1/E39-R3.
Page: Dimensions, 9. Sensing method: Through-beam.
Connection method: Pre-wired Connector (M8, 4 pins).
Sensing distance: 25 mm.
No. of opti- cal axes: 2.
Model: PNP output.
Photoelectric Sensor with Grooved.
Design and Easy Settings .
Groove-type Sensor with groove width of 25 mm.
Models are available with one or two light axes.
Models are available with M8 pre-wired connectors. Appearance: 6.5 dia.
Sensing distance: 2 mm.
Connecting method: M8 Pre-wired Connector Models (0.3 m).
Cable specifications: PVC (oil-resistant).
Operation mode: NC.
Wire color /pin arrangement: 1: +V, 3: 0 V, 4: Control output.
Model: PNP output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available.
High-speed rresponse frequency stably detects moving,
objects: 5 kHz max FZ4-H655-10.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube againstt wire,
breakage is available (M4, M5 only) FZ4-H655-10.
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables.


...More relevant models >>>>
Last one: OMRON FZ4-H650-10
next one: OMRON FZ4-600